Doors "Architect": reviews, review of models and photos

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

For those who make repairs in the house, the issue of choosing interior or entrance door structures is especially relevant. When choosing a manufacturer, the consumer carefully studies the reviews devoted to it. Doors "Architect", for example, have long established themselves in the Russian market. Decent quality of products of the Volga company is undeniable. In the article, we will consider the most popular models of interior doors among buyers, we will note the main advantages and disadvantages of the designs of the Zodchiy company.

Let's pay attention to the history of the company

The firm "Architect" was founded in 1999. The company was founded by a Chuvash entrepreneur in the Volga town of Novocheboksarsk. However, at first, the company produced only stairs. Interior door structures appeared in the product catalog only a year and a half after the start of activity.

The first products were made from woodarray. A few years later, the factory assortment of "Architect" expanded, which prompted the creation of a separate retail chain called "World of Doors".

Today the company is one of the largest manufacturers of door structures in Russia and the undisputed leader in its industry in the Volga region. According to reviews, the doors "Architect" are in great demand, since the company's products meet all quality standards and have an adequate cost.

There are four factories belonging to the "Architect" enterprise. In Novocheboksarsk, veneered structures are produced, stairs and arches are produced in Cheboksary, and interior and metal products are produced in the village of Kugesi, Cheboksary region. Factories work smoothly, every year enterprises produce a huge range of finished goods intended for the design of residential premises. Entrance and interior doors of the company "Architect" organically fit into any interior.

What makes the products special

Unlike competitors, which are the leading door factories in Russia, "Architect" manufactures structures using the "full cycle" method. This means that all stages of manufacturing, starting with the procurement of raw materials and up to the installation of fittings on the canvas, the company "Architect" carries out independently. The company's stores sell products that are completely ready for installation.

The production process involves modern equipment that meets all standards and GOSTs. Thanks to the use of high-tech devices, the risk of manufacturing is minimaldefective products in the shops of the enterprise "Architect". Reviews about doors are usually positive. Moreover, potential buyers should also be pleased that the installers leave positive feedback on the quality of products.

In addition, the company uses fittings of its own production, which allows us to provide decent quality interior doors. All products are covered by a three-year serviceable warranty.

Purchase Benefits

Looking at the photos of Zodchy doors, it becomes clear why these products are popular. They have a stylish presentable look, and such designs can be called universal due to the harmonious combination with any interior solution.

There is no problem in where to buy entrance or interior doors "Architect". The catalog contains hundreds of models, each of which is available to residents of almost all regions. For almost 20 years of existence, the company network has grown significantly. To date, the company has more than two hundred stores throughout Russia. Large branches are located in the capital, St. Petersburg, Kazan, Sevastopol, Krasnodar, Yekaterinburg, etc.

The company managed to establish a logistics system - now the order arrives to the buyer in 2-3 days. Prompt delivery of products to almost any city ensures uninterrupted demand for the most popular offers. By the way, more than 15,000 door systems ready for sale are waiting for their buyers in specially equipped warehouses.

Models incatalog doors "Architect", which are in the greatest demand, are always available. Moreover, such designs are produced in the most popular color, which is a kind of guarantee for the implementation of fast delivery of products, regardless of the time of year, the nuances of production and other circumstances. If the buyer wishes to receive a product with non-standard dimensions, he can place an individual order according to the "Architect" catalog. Doors are made within a week, but with delivery you will have to wait 10-14 days.

Dimensions and color palette of door panels

The assortment of the Zodchy door factory has an impressive number of interior and entrance door systems, arches and sliding structures. The widest choice of shades and colors is presented here, so in the catalog everyone will find a solution suitable for any type of room. Veneered doors are made in 20 colors, and products with PVC coating - in 40 colors. A wide range of colors is achieved by painting canvases with oil and enamel paints.

Moreover, it is worth noting that all models are different and completely different from each other, since various materials are used in the manufacturing process (veneer, PVC, laminated, paintwork, etc.). In addition, Zodchy interior doors are represented by a huge line of products, during the creation of which various types of finishes were used with the introduction of metal elements.

Another important point is the size. As already noted, the "Architect"accepts orders for the manufacture of non-standard products. Some systems with unusual dimensions are available. The width of the door leaf "Architect" (it is impossible to determine the exact size of the structure from the photo, but even in the pictures the difference between the custom-made product and the standard one is visually noticeable) can be in the range of 400-960 mm, and the height can reach 230 cm.

Architect is one of the few door factories that produce doors with additional transoms for high openings. Products of the Volga company will perfectly fit into various openings of houses and apartments. A huge selection of sizes is also available when ordering sliding structures and arches.

Popular veneer models

Firm "Architect" offers a wide range of interior door products in different stylistic directions. The most popular are the designs made of veneer. It is impossible to fit all the photos of the interior doors "Architect" in one article, but still a few images will help to get a general idea of the style of the models.

For example, such products as "Lydia", "Diana", "Verona", "Caramel", "Cardinal", "Nika", "Valencia", "Florencia" are made in the classical style. The cost of doors starts from 5990 rubles. They are suitable for interiors decorated in light colors. No less popular representatives of the "classics" are Palermo, Viva, Prima, Symphony-Bravo, Solo, performed in darker colors.

High-tech or Art Deco fans should pay attention to models called"Inspiration" and "Etude". Very popular is the product of the Nuance series. Its peculiarity lies in the successful combination of two tones.

In general, veneered interior doors are the most purchased among the population. The choice in favor of such structures is given by people who prefer environmental friendliness, homeliness and naturalness of the situation. Door systems made of veneer are characterized by high strength, besides, they are absolutely harmless to others. Most people like the appearance of veneer products, but this is not its main advantage. In case of damage to the canvas, the veneered door can be easily restored or its surface replaced. Such structures can be installed even in rooms with a high level of humidity.

In reviews of interior doors "Architect" buyers indicate that they most often choose veneered products because of their light weight. Compared to solid wood designs, these systems are much lighter and therefore much easier to install.

Cloths are made of oak, walnut and beech. The basis of the product, as a rule, is a chipboard or plank material. In the production process, the generally accepted principle of manufacturing a veneered door is used - a thin sheet of precious wood is applied to the canvas. This is the secret of the rich and sophisticated appearance of the product at an affordable cost. To make veneer doors last as long as possible, they are covered with a special varnish, as a result of which the product acquires natural luxurious shades.

PVC film constructions

In cataloginterior doors "Architect" you can find models with PVC coating. This synthetic material is a special film that is applied to the door leaf. As a rule, PVC trim is used in the manufacturing process of budget interior structures. These doors are inexpensive, but at the same time they have high functional qualities. PVC film is non-toxic, has good moisture resistance, wear resistance. It will not be easy to accidentally scratch the PVC coating, as the film is not afraid of mechanical damage, so the surface retains its appearance for a long time.

Interior designs with PVC trim are the most affordable option for those who want their doors to last for decades. For several years of operation, the doors remain unchanged. PVC film is resistant to moisture, it does not fade in the summer when exposed to scorching sunlight. Such interior doors are usually installed in any premises where there is a need for it. Designs do not require special care.

Zodchiy produces Mados fittings for its interior doors. Only positive reviews are written about door handles, hinges, locks and other elements, without which the operation of door systems is impossible.

Production details

Today, the market presents interior door systems of various plans. Traditional models are single-leaf and double-leaf canvases. Each door structure is accompanied by a detailed diagram in the form of a drawing. At the corethe door leaf is a frame made of solid wood, which is glued on both sides with MDF sheets using hot pressing technology. MDF boards are about 5-6 mm thick.

After that, a finishing coating is applied to the MDF - veneer or PVC film. The edge of the product is lined on all four sides with the same material as the canvas. This guarantees additional wear resistance, protects against moisture, prevents warping, cracking, peeling.

Products with glazing elements are completed with triplex stained glass. The thickness of the insert is usually 4 mm. Glass is inserted through the upper grooves of the canvas. On some models, the glass is front-mounted, then secured with a decorative wooden grille. Despite the presence of a glass insert, the “Architect” doors, according to reviews, do not rattle, which is explained by the fixation of the decor with a transparent silicone sealant. To improve the heat and noise insulation properties, a rubber or silicone seal is used. In addition, the set includes capitals, extensions and slats.

Each door model is made in several popular colors according to the warehouse program, however, when making a product to order, the buyer has the opportunity to choose a shade from the available colors.

Compliance of Volga products with standards and GOSTs

All products that are in stock or made to order comply with European and national quality standards, in particular GOST 6629-88, GOST 475-2016. In accordance with these regulations,interior doors can only be made from natural wood, but the product can be covered with veneer, plywood boards, plastic film, metal profiles or paints and varnishes. Government regulations also do not prohibit the use of glass.

In accordance with the specified standards, all interior doors are manufactured under one of the types:

• blank blade products;
• glazed structures;
• entrance systems with solid filler.

When buying any type of door, you must consider a number of basic technical requirements. First of all, the buyer should pay attention to the correctness of geometric shapes. If you install a poor-quality design made from assembly parts, misalignment may occur over time.

What details to look for when choosing

Consultants of the firm "Zodchy" are ready to assist in the selection of the door design, depending on the shades of furniture and flooring. Most often, designers recommend buying doors a tone lighter or darker than the floor. An interesting solution will be in which the door structure contrasts with the interior.

For modern styles, “Architect” doors are made with metal molding or plastic inserts. Additional elegance to interior systems gives glazing. Such models are finished with decorative triplex impact-resistant glass.

When choosing doors for a room with high humidity, it is advisable to give preferencestructures made of softwood.

Wooden products made of cedar, pine, larch have excellent moisture resistance. If it is necessary to install an interior door to a bedroom or hall, models made of birch, alder, aspen, linden, poplar and ash are quite suitable. All these species are practically not inferior to coniferous trees in terms of hardness, they are resistant to decay processes, strong in bending, but at the same time they are cheaper.

When buying, it is important to pay attention to what kind of wood was used in the manufacture. One door leaf cannot be assembled from materials of different species; only spruce, fir, pine and cedar can be combined. The finished product is covered exclusively with transparent varnishes. Thus, it is impossible to hide from the buyer the fact that several types of wood are used in the production process.

When purchasing a door, many buyers do not know what comes with it. According to the above-mentioned GOSTs, along with the product, the consumer must receive fittings (locks, door handles, hinges, etc.), packed in a separate box. When supplying interior doors with glass inserts, all glazing materials are stacked separately. If the manufacturer has put up for sale a structure that is in factory readiness and fully assembled, the buyer has the right to receive the door disassembled.

What customers don't like

Despite the obvious advantages of the products of this company, not everyone was able to appreciate them. Some buyers, relying on the stability and good namecompanies remain disappointed not so much with their acquisition as with the disorganization of some employees of the enterprise. Most often, incidents occur during the installation of the entrance doors "Architect". According to customer reviews, it happens that the masters delay the installation work for several days.

If the coating on the door peels off, the buyer has the right to contact the company and demand the replacement of the door leaf. But the level of service also does not always cause positive emotions.

In their reviews, people refer to the rudeness of the employees of the company's stores, which sell ready-made doors. It cannot be said that customers are treated disrespectfully in all branches of the company, but nevertheless such incidents took place. There are no complaints about the quality of Zodchy products.

Is it worth buying doors "Architect"

The main advantage of the products of the Volga door factory is a guarantee of many years of trouble-free operation. Any design, be it a metal entrance door "Architect" or a hinged veneer system, has the declared quality.

On the one hand, doors are a product for many years of operation, so it is impossible to immediately verify the quality of the product. Before saying that these designs meet the promised performance, they need to be tested by time. On the other hand, when purchasing doors from the Zodchiy company, which has been occupying a high position in the Russian market for almost 20 years, most buyers do not doubt that there are no risks. And thisconfirmed by high performance.

According to customer reviews, the doors "Architect" - a worthy choice. So that he does not disappoint in the future, it is necessary to clearly understand what material the door should be made of, and what design is preferred.