Which corrugated board is better for a fence? Subtleties of choice

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

The outer fence not only serves as protection against intruders, but also partially serves as a decorative design for the local area. It is possible to equip such a structure with high quality and inexpensively, if you know which corrugated board is better for the fence. There are also some nuances in using this relatively budget material. Let's try to understand them and take into account the main features during installation and operation.

What to consider?

When choosing a material for a fence, you need to consider not only the appearance and cost, but also the quality of the product. It is necessary to determine which corrugated board is better for the fence at the design stage. A low-quality metal profile undergoes peeling and burnout over time.

When choosing a material, the following factors should also be considered:

• Metal thickness.
• Corrugation height.
• Resistance of the outer coating of the sheet.
• Dimensions of fencing elements.
• Type of mounting and racks.
• Norm in the number of square metersor sheets.

As a result, you will get a simple answer to the question of what is the best corrugated board for the fence to choose: the material corresponding to the optimal combination of price and quality, as well as the overall exterior in terms of color and design configuration.

Metal profile characteristics

Any kind of considered material consists of thin rolled steel. It undergoes a hot-dip galvanizing process plus passivation, priming and finishing spraying. It can be two-sided or one-sided.

For example, the inner side can be covered with a paint layer, and the outer part - consist of polymer components. Such processing allows to achieve good strength and resistance to aggressive external influences. Depending on the quality of processing, the parameter of noise and thermal insulation increases, as well as the resistance of the structure to frost.

What thickness is the corrugated board for the fence better to take? Experts recommend using sheets with a thickness of at least 0.5 mm. This is due to the fact that the estimated working life of each one tenth of a millimeter is about five years of operation. When choosing a metal profile for a fence, give priority to the quality of the material and manufacturers, which we will discuss below.

Which corrugated board is better for a fence?

Hundreds of companies produce the material in question. It is not easy to choose sheets that meet the required parameters. Below is a listpopular and trusted manufacturers operating in the domestic market:

1. European manufacturers – Myriad, Voest Alpine, Salzgitter, Alzelor, Ruukki.
2. Domestic brands - Severstal, NLMK, MMK.
3. Other manufacturers - Tata Steel from Turkey, Mital Arcelor (Poland).

What thickness of corrugated board is best for a fence? The above firms comply with the required dimensions. And the worst option would be a Chinese counterpart from unknown companies, the thickness of which may not even reach 0.34 millimeters. This design resembles more foil than a full-fledged material for arranging a fence.

Selection criteria

An important point is the processing of the profile on the machines. This option plays one of the most important roles in which corrugated board is better to use for the fence. A defective batch will last a very short time, which means a lot of trouble associated with the installation and maintenance of the structure.

Another significant parameter is the introduction of zinc. According to GOST, the coating must include at least 275 grams of this component per square meter of sheet. Unfortunately, this aspect is often underestimated by 1.5-2 times. The importance of the component lies in the anti-corrosion properties that determine the working life of the fence.

A few indicative tips about the characteristics of a metal profile:

• Optimal sheet thickness should be at least 0.4 mm.
• Inclusion of zinc– from 140 grams per square meter of material.
• Thickness more than 1.2 mm is also impractical, due to the increase in cost along with similar strength.
• It is advisable to choose a product from a trusted manufacturer.

Profile Types

Before deciding which corrugated board is better for a fence, let's dwell on the type of profile. In this case, one of the main characteristics is the height of the wave and its shape. As fences, products with the marking "C" or "CH" are most often used. The height of the corrugation is marked with digital designations, from 8 to 25 millimeters. The large dimensions of the corrugations cause a smaller size of the working plane. For grades C8 and C10, the optimal width will be 1150 mm, for other modifications - no more than 1100 mm.

The strength and stiffness of the sheet depend on the shape of the corrugation. The lowest indicator is noted for the material of category C8. The configuration is divided into several types, namely:

1. A wave-like corrugation, reminiscent of building slate in design.
2. Trapezoid configuration (high rigidity).
3. U-shaped cassette.

The weight of the sheet of the material in question is from 4.5 to 12 kilograms per square meter. This difference is due to a number of characteristics (metal thickness, corrugation height, additional coating).

Which corrugated board is better to make a fence from?

Determining the answer to this question, it is necessary to consider the types of coveragesheets. There are a lot of options here. Given their features, you can easily choose the best option based on the specific situation. Let's start with the most popular types:

1. Hot galvanized processing method. This design is characterized by good metal protection against corrosion. In this case, the amount of zinc must be at least 140 grams per square meter.
2. Aluzinc. A coating similar to the previous version, but significantly superior in strength and durability.
3. Paint finish. This form of treatment makes it possible to protect the metal due to the formation of a film, and also gives a beautiful appearance to the sheets. However, it is subject to mechanical damage.
4. When choosing which profile for the fence is better from corrugated board, pay attention to the polymer coating. It has a wide range of colors and thickness. Below we consider the varieties of this material.

Polymer coatings

Each type of this coating has its advantages and disadvantages:

1. Glossy polyester belongs to the budget category. Its thickness is about 25 microns.
2. The matte analogue is almost identical in composition to the above material, its thickness reaches 35 microns.
3. Plastizol refers to decorative polymers. The composition of the material includes PVC and plasticizers. The thickness of this option is 200 microns. The covering differs in resistance to atmospheric and mechanical influences. Surface structure can be performedtexture pattern under the skin or a stroke reminiscent of birch bark. The coating has its own properties, color palette and thickness standard.
4. Pural. Pay attention to this material, because, being interested in what thickness it is better to choose a corrugated board for a fence, many people think that the thicker the sheet, the better. The considered polyurethane coating, although it has a thickness of 50 microns, is highly durable and resistant to aggressive influences of any type.
5. PDF (PDF). This material consists of 80 percent polyvinyl chloride and 20 parts acrylic. The coating has a tolerance for temperature changes, does not fade, and is ideal for installation on sea coasts.
6. Printech. An innovative type of polymer that mimics various natural materials, including wood or stone. Coated by offset printing, thickness up to 35 microns, resistant to s alt, thermal and acid attack.

Stand selection

Which pipes are best for corrugated fence? Experts recommend using two types of racks. Pipes of profile or round section are suitable as vertical supports. For logs, profile-type elements with a rectangular or square cut are mainly used.

From this it follows that for the type of fence in question, two types of rolled metal pipes are needed. This makes it possible to save on the purchase of expensive cross-sectional analogues. It is worth noting that the vertical racks should have an increaseddiameter, and thin options are suitable for horizontal overlaps.

Stand sizes

Vertical supports are recommended to be selected with a size of 60 millimeters in diameter. If the height of the fence exceeds 2 meters, this value increases to 80 mm. Round pipe due to the high price for racks is used extremely rarely. Most often, profile analogs with a cross section of 6040 mm or 8060 mm are used.

The total length of the vertical supports is determined taking into account the height of the building. 30 percent of the underground part is added to the total value. The number of pillars is calculated based on the total perimeter, approximately two elements per meter. As a log, only a profile pipe is used. Such elements are much more convenient when installing horizontal ceilings. In addition, the fixation of the metal profile sheets themselves is thus facilitated. Log size – 4020 mm.

Installation features

The following are mounting options for corrugated fence posts:

1. In the first version, the support is driven into the ground by a third of the length of the rack. This method is fraught with the possibility of the column deviating from the vertical.
2. The bored method consists in plunging the stand into a drilled socket. The supports are fixed by filling the shafts with cement mortar. This method of installation is very reliable, but requires a significant amount of time.
3. Stuffed version. The post is fixed in the nest with sand and gravel bedding.
4. The screw version resembles the method of installing piles. The structure is screwed into the ground like a self-tapping screw.

In conclusion, it can be noted that a fence made of corrugated board is a completely reliable and durable construction, which is distinguished by a variety in color and texture.