2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
The technology lesson is one of the favorite subjects for children, because in these classes the children learn to create, sculpt, sew, invent, where mental work is sometimes replaced by very fun things.
But for a technology teacher, this is a big responsibility, since any teacher is responsible for the safety of life and he alth of children. Therefore, it is necessary to immediately acquaint students with safety rules at technology lessons.
Paper Handling
This type of work is especially common in elementary school. And it should be noted that it is during this period that the teacher especially carefully needs to monitor compliance with safety rules in technology lessons, since children are still small, and first graders are just beginning to learn all the basics of school life.
It is necessary to pronounce all these rules every lesson so that the children remember them firmly. Where to begin? What are the rulessafety in technology lessons when working with paper should be observed by children?
- Don't touch anything. This is the main rule for all activities. Teach children not to take things unnecessarily until the teacher has indicated the need for one or another item, be it scissors, glue or just a pencil. So the teacher will make his work easier in the future, and the possibility of accidents will decrease significantly.
- Scissors. This is a sharp object, which means that it can be dangerous to he alth and even human life. In no case should you use them as a toy, wave them from side to side, point them at a nearby person or yourself, because this can cost your he alth. Also, you do not need to run with scissors, but you should pass them by holding on to the tip. They should be in the pencil case until their use is needed. When making cuts, keep your fingers out of the path of the scissors.
- Paper. Oddly enough, but it can also be dangerous. Firstly, small children often cut themselves on its edges, and this is very unpleasant. It is strictly forbidden to taste paper (yes, and this happens in elementary grades), because chemicals were used in its manufacture that can be harmful to he alth.
- Glue. Avoid contact with eyes, mouth, as you can cause serious harm to your he alth. Wash your hands thoroughly after using the glue.
Sewing
Another dangerous activity in which safety rules must be observed in technology lessons is sewing. After allin addition to the scissors, which have already been mentioned, there is another dangerous item here - a needle.
Never leave a needle unattended, always stick it in a special pad
- When sewing, you need to be extremely careful not to prick yourself or your comrades.
- The thread should not be too long, because otherwise the person has to move his hand far away from himself, for the entire length of the thread, and someone might be sitting next to him.
- If a needle is suddenly lost, a magnet can help find it. Need to swipe them on clothes and gender.
Tech in boys
Special attention should be paid to the safety rules in the technology lesson for boys. Usually in the 5th grade, children for this lesson are divided by gender. Girls are brought up to be future housewives, they are taught to sew, cook, and boys are made into real men.
The latter work in the workshop, where there is an abundance of dangerous items. Therefore, it is extremely important for them to know what can and should be done:
- You need to hold any tools in such a way that the sharp part is directed away from you.
- Use tools only as directed and authorized by the teacher.
- If injured, stop work immediately.
- After finishing work, put away all inventory.
There are many other rules for boys, but these are the most basic ones that you just need to know.
Working with other materials
Technology lesson is notonly sewing, paperwork and workshop. There are other activities in which you need to know and follow the safety rules in technology lessons.
- When working with plasticine, you can not taste it, try to put it in your ears or nose.
- Safety rules for girls' technology classes include knowledge about working in the kitchen. These include work with sharp and cutting objects, which should be used only for their intended purpose and with care; hot stove that can burn you. A frying pan with a handle must be turned away from you so as not to turn it over.
- When working with beads or beads, it is worth remembering that they must be in a special box, and not scattered on the desk, you can not put them in your mouth, nose or ears. This can seriously harm your he alth.
- When knitting, do not bring knitting needles close to your face, do not wave them from side to side, do not make sudden movements. If you need to leave, you should remove the work you have started to a safe place.
In 5th grade, safety rules in the technology lesson will be more extensive, as new activities appear, and therefore new rules. But any student should know the basics to avoid an accident.
Recommended:
Safety precautions for a welder during work: standards, rules and instructions
Welder is not an easy profession, but very necessary and in demand. However, we all know that this type of activity is not the safest. Today we will look at the safety precautions that professionals must follow in order to avoid accidents while working
Suspension of LLC activities. Application for suspension of activities of LLC
Suspension of the activities of an LLC may be required in cases where it is important for the founders to maintain a legal entity, but it is not planned to conduct active activities. In making such a decision, the taxpayer must present the sequence of actions to be taken and their consequences. All this will be discussed in the article
Occupational safety specialist: job description. Occupational Safety Specialist: Key Responsibilities
As you know, every employee in any enterprise should have their own job description. The labor protection specialist is no exception to this rule. He, like other employees, has a number of duties and functions that undoubtedly require a detailed presentation on paper
Division of labor is the separation of different activities
The division of labor is a criterion applicable both on a national scale and separately to each of its citizens. Today we will talk about exactly what forms it exists and how it affects the final results of an enterprise or an industrial sector
Maximum and average weight of a ram at different ages: an overview of different breeds
Sheep are very popular farm animals. Sheep are bred in almost all corners of the world, including in unfavorable natural areas. These animals were domesticated a very long time ago - in the 6th-7th centuries BC. In addition to unpretentiousness, farmers also attribute the ability to quickly gain muscle mass with low feed costs to the pluses of sheep