2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
Practically all the main mechanisms of any industrial equipment work with compressed air energy. Often, the start-up of the equipment is associated with the operation of the valve from the flow of compressed air. For the normal operation of these mechanisms, it is necessary to control the supply of compressed air to certain components of the mechanisms. Camozzi pneumatic distributors can help with this. They will distribute air flows in a short time, ensuring the operability of units and mechanisms.
Camozzi air distributor
A pneumatic distributor is a device that allows you to redirect the flow of compressed air under the influence of external forces. Most often, this function is performed by an electric coil, which is triggered by an electric current. The coil is connected to the Camozzi valve mechanism and opens certain paths for the passage of compressed air intodepending on the position of the distributor valves.
When operating the equipment, it is necessary to monitor its performance and the quality of its functions. In this regard, the Italian company has found the best option for the production of devices that meet most of the requirements of consumers.
Working principle
The working principle of the Camozzi air distributor is associated with certain specific conditions. Its operation is influenced by an external source, usually an electric current. The solenoid coil with a core, which is connected to the valves of the air valve, closes or opens the directions for the flow of compressed air.
There are two types of these mechanisms with manual and combined control. The choice of a specific control method depends on the operating conditions of the Camozzi pneumatic valve. It should be noted that the combined control method is currently widespread. It allows you to use the so-called blocking when the compressed air pressure decreases, while the pneumatic valve connecting the power contacts of the equipment control circuit does not work.
The Camozzi pneumatic distributor is connected to the pneumatic wire line in a two-channel, three-channel and four-channel way, using two types of construction: spool and valve. Depending on the conditions of use, their designs also differ.
Fastening is carried out in three ways. Choosing one of themdetermines the type of premises and the external conditions under which the mechanism is used. The methods are called: pipe, butt and threaded. But do not forget about the pressure in the system. At higher values, butt and pipe methods may not be suitable.
Features
Let's consider the main characteristics on the example of Camozzi 358 015 02 pneumatic valve. It has compact overall dimensions, one-way control, spool type design and monostable spring return valve. The device features an operating pressure range of 1.4 to 10 bar and an operating temperature of 0 to +60 0C. The air consumption per minute is up to 700 Nl, the body consists of aluminum and its alloys. The material from which the spool is made is stainless steel. This device can be installed in any position.
Benefits
The main advantage of the Camozzi air distributor is the quality of its workmanship. Since it is produced by an Italian company, there is no doubt about the use of modern materials and technologies. The device can be used at both low and high temperatures. Also, the pressure of the air flow can vary from low to high. The distributor itself is made in such a way that it does not allow dirt and dust to get inside. If the coil fails, it can be replaced without dismantling the product itself.
Recommended:
Hydraulic press: description, device, principle of operation, characteristics
Processing various materials under strong physical pressure allows you to perform stamping, cutting, straightening and other operations. Similar works are organized in construction, in production, in the transport sector and car services. Technical conditions for them are most often created by means of a hydraulic press, which is controlled directly by the operator without power auxiliary units
Electric locomotive 2ES6: history of creation, description with photo, main characteristics, principle of operation, features of operation and repair
Today, communication between different cities, passenger transportation, delivery of goods is carried out in a variety of ways. One of these ways was the railroad. Electric locomotive 2ES6 is one of the types of transport that is currently actively used
Low pressure heaters: definition, principle of operation, technical characteristics, classification, design, operation features, application in industry
Low pressure heaters (LPH) are currently used quite actively. There are two main types that are produced by different assembly plants. Naturally, they also differ in their performance characteristics
Gas piston power plant: the principle of operation. Operation and maintenance of gas piston power plants
Gas piston power plant is used as a main or backup source of energy. The device requires access to any type of combustible gas to operate. Many GPES models can additionally generate heat for heating and cold for ventilation systems, warehouses, industrial facilities
Pneumatic high pressure pump. Pneumatic diaphragm pump
Pneumatic type pumps are in demand in various fields. There are models from different manufacturers in stores, and they will differ in parameters. In order to understand this issue, you need to consider the device of a pneumatic pump and its types
