Paint manufacturers in Russia: overview, types and reviews

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

New developments make it possible to produce materials with improved technological properties. Paints were included in the list of such materials. During the repair process, most people find it difficult to choose which paint to choose, because it is easy and comfortable to use, makes it possible to remove defects on the walls, and also gives the coating a bright shade. This article will review the best paint manufacturers in Russia.

What are they made of?

Most often, paints are produced according to the same type of structure of the components. As practice shows, they consist of:

• Binder composition.
• Pigment.
• Filler.
• Specialized additives.

The binder composition is necessary for the formation of a film on the coating. Regarding the pigment, it is worth noting that it plays the role of an element that gives color. Filler - components that make it possible for paint manufacturers in Russia to save on pigment, give the paint shine, as well as stability. Specialized additives reduce drying speed andcuring, protect coatings from solvents, mold, fungus, and also increase the characteristics of the mortar.

Some of the specialized additives are able to give the material fungicidal parameters, as well as fire safety properties. Considering today's types of paints, a person should know that they contain 8-16 components. How accurately they are blended and selected is the quality of the composition.

Views

Today, even an expert finds it difficult to choose paintwork materials, because the list of paint manufacturers in Russia is extensive. In addition, the range varies in structure, shade and scope. In this case, it will not be superfluous to know about finicky and ordinary species.

The following features affect the type of today's paints:

• Binder content.
• Type of thinner.
• Scope of use.
• Final result (shine level).
• Paint support.

Classification by binder content

According to the content of the binder, paints are divided into:

1. Oiled.
2. Silicate and calcareous.
3. Alkyd.
4. Water emulsion.
5. Acrylic.
6. Silicone.
7. Polyurethane.
8. Epoxy.

Oiled

Oil paint consists of a pigment and a binder, the role of which is played by drying oil. As a pigment, paint manufacturers in Russia use ground flour from minerals, which does not break down in water, oil, and household solvents. It is much heavier than the base, andthis means that it goes to the bottom of the container together with the coloring component. Because of this, before you start painting, it is thoroughly shaken and mixed.

Limestone

Refer to the category of mineral paints. Mineral paints are a type of paintwork materials, where competently crushed materials are used as a pigment. The binder component of such a paint is slaked lime (in some cases, powder paint manufacturers in Russia use milk of lime).

In order to increase water resistance during the production of the composition, specialized additives are used: aluminum alum, calcium chloride, and kitchen s alt. Inorganic pigments are used to form lime paint, and shades of light are found in the color palette.

Silicate

These paints are designed to work on durable, absorbent mineral-based surfaces (lime, cement-mixed stucco, concrete, and brick) that do not contain synthetic ingredients, gypsum materials, adhesives or oils. Surfaces that contain lime are weakened with fluates - a solution of metal s alts in water using silicon acid.

Alkyd

This category of paints is made on the basis of alkyd varnishes, fillers and solvents. In addition, the composition contains pigments that give shade. Often factories - manufacturers of paints in Russia add a whole list of additives to it. Among them there are antiseptics, the purpose of which is to protect the coating from possible mold and fungus.

Water emulsion

This type of paint has recently gained immense popularity due to its lack of toxicity, excellent hiding power, and a wide range of possible uses. Today, this type of paint is the most environmentally friendly facing material. It is worth noting that water-based paint manufacturers in Russia have done everything necessary to use such paint even on stair corridors.

Acrylic

This type of paint is frost resistant, it freezes only at -40 0C. It is necessary to soften the mixture little by little, the process takes an average of a couple of days. The container must be taken to a room where the temperature is above zero. Before you start using the paint, it must be stirred and, if necessary, diluted with water. Acrylic paint manufacturers in Russia state that exterior paint should dry at 18 to 22 degrees. Complete drying occurs within two hours.

Silicone

Made in water based silicone resin. Paint manufacturers in Russia claim that these are innovative technologies in the universe of decorative materials. Silicone paints make it possible to process almost any coating, except for reinforced concrete, because air enters the concrete base and promises corrosion of the reinforcement. This type of paint has absorbed the best that exists in acrylic and silicate formulations.

Polyurethane and epoxy

More oftenall used in the industry. If the polyurethane composition dries at an incredibly high temperature, then talking about its use in the construction field will be inappropriate. Epoxy - a composition of two elements, which is used most often in the industry. In the construction industry, it is used during the installation of pools or during the repair of enameled bathtubs.

Overview of Russian manufacturers

Considering the production of paints and varnishes in Russia, many domestic consumers, according to their reviews, prefer imported products. Often this decision is determined by a strengthened pattern that foreign paint is in many ways more reliable than domestic paint. But in the Russian Federation, there are also manufacturers of paints and varnishes that demonstrate high-quality products.

LLC TPK "Pentan"

One of the leading firms in this industry. It should be noted that the company not only manufactures paint and varnish products, but also makes polyethylene, materials for electrical insulation, and also has the capacity of the petrochemical industry. The company is relatively young as it was founded in 2007. The activity of employees and well-formed management tasks enabled the company to become a leader in paint and varnish products in other areas in a short period of time.

ABC Farben

Since 1995, a plant located in the Voronezh region has been operating, which has been reconstructed and expanded many times. History of this manufacturerroad paint in Russia (and not only) began with the oil category of paints PF-115. Today, according to consumer reviews, the company produces a huge range of varnishes, coloring solutions, varnishes, enamels for any surface.

Employees are systematically trained to improve experience in Finland and Germany. Each of the workshops has its own laboratory, which monitors the quality of materials and manufactured products. The crisis of 2009 gave firm leaders the determination to change direction to cheaper products and increase the segment of paints in this category.

Customers note a wide range of ceiling paints, strict quality control and a very pleasant cost of products. Of the minuses, density is distinguished, and in some cases the formation of lumps.

CJSC "Empils"

A large company that was established in 1991 on the basis of chem. factory in Rostov. Now - 100% leader in the manufacture and sale of zinc oxide. In addition, the company is on the leading position in the list of manufacturers of powder coatings in Russia. Products are made according to innovative technologies, have high quality and 100% environmental safety. This is confirmed by numerous reviews. Materials are delivered to all domestic regions, to the CIS countries and even to European countries. Products are made in several models: "Flourishing", "Empils", and "Halo".

NPF "Emal"

Research industrial company has been on the market for two decades and is included in the list of the bestmanufacturers of facade paint in Russia. During this period of time, the organization has come a long way from developing ordinary oil-based enamels to mastering the production of advanced silicon, organic enamels.

Now the company manufactures more than 35 types of coatings, including fireproof, facade, chemical-resistant, as well as organic silicate enamels. The latest equipment makes it possible to produce up to 10 thousand tons of varnishes, enamels and other products per year, which is very pleasing to customers.

VGT

This Russian association has two factories - in Yaroslavl and Moscow region. Innovative platforms are equipped according to European standards. The company is engaged in the production of paints, varnishes, putties, as well as enamel products. The catalog contains more than 200 items of products. All products are under strict scrutiny by researchers and are accompanied by conclusions from the sanitary and fire services. Quality certificates are available to all customers on the manufacturer's website. The assortment is sold in 73 regions of the Russian Federation and imported to six countries abroad.

Customers note a good choice, quality documentation and a convenient dealer network. Among the minuses is the harshness of the smell and the long drying period.

Teks LLC

The company was founded in 1994 and is on the list of leaders in the production of coatings in the Russian Federation. Products are in the middle segment of the cost and have good quality, which gave the company a colossal sales of products (more than fivethousand points of sale). The manufacturer provides a huge selection of products:

• Antiseptics and varnishes.
• Adhesives and enamels.
• Putty and paint.
• Primer and more.

Pigment Holding Company

The company, founded in 1839, manufactured and supplied its own products to the courts of emperors. Now the company is a major manufacturer of chemical compositions in the Russian Federation. The holding is the most difficult structure, which includes all the required components: personal scientific laboratories, subsidiaries, factories, as well as logistics. The company produces varnishes, putties, paints, enamels, hardeners, and primers.

Results

Recently, it has become a trend to buy products whose brands are known and promoted. And it's not just that. Large factories that have many years of experience in the manufacture and sale of coatings are attentive to market demand. Such firms have the means and capabilities to meet this demand, in connection with which their products are known.

Besides this, the key factors are PR and promotion. All of the above companies are one of the leading manufacturers of paints and varnishes in the Russian Federation. Their products are of excellent quality, 100% environmentally safe, and also comply with all the rules and conditions of GOST.