2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
Practice shows that when laying sewerage systems, 110 mm pipes are the most popular. These products are used for the installation of various parts of the pipeline. The connector for connecting the toilet to the sewer has just such a diameter, which can be said about some outlets for bathrooms and showers. In general, sewer pipes are made today from different materials, namely:
- plastic;
- ceramics;
- concrete;
- metal;
- asbestos.
Which pipes to pay attention to
Among pipes with the same diameter, the main competitors are plastic and metal. But the former are forced out of the market by metal products, because PVC has many advantages. First, they are resistant to corrosion. Secondly, they are not afraid of alkalis and acids. Third, they are light in weight. They are inexpensive, they are much less likely to clog, because the inner surface is very smooth.
The material is resistant to hightemperature, products made from it are easy to install, and the pipes themselves have an aesthetic appearance and do not require painting. Plastic pipes have a great many advantages, so their popularity is constantly growing. The only negative should be considered the fear of frost. When exposed to low temperatures, products can change their dimensions and burst. Therefore, they are recommended to be used for indoor installation, while for outdoor installation, the system needs to be insulated.
Specifications
A rather important parameter when choosing are the dimensions of the sewer pipe. 110mm is the diameter you should pay attention to when buying. However, there are other performance properties that are important to the consumer. Among others, strength should be highlighted. If you have a corrugated pipe in front of you, then it consists of three layers and can be laid to a depth of up to 8 m. Temperature limits for operation vary from + 65 to - 10 ˚С. The internal pressure that the pipe can withstand is equal to the limit from 6 to 16 bar. The final value depends on the wall thickness and design.
Ultimate Strength
When considering the dimensions of a 110 mm sewer pipe, you should also pay attention to other characteristics. Among them, the tensile strength at break should be highlighted. It is 50 MPa. The specific gravity of such products is 2 kg/p. m. It depends on the wall thickness and diameter. You may be interested in more operational terms. You can use such a pipe up to 50 years.
Sizes
Pipe sizes are regulated by technical specifications. If you have a 110 mm pipe in front of you, then you can use it when laying non-pressure networks. The length of such products can vary from 500 to 6000 mm. The outer diameter is 110 mm. You should also be interested in other sizes of 110 mm PVC sewer pipes. This should also include the inner diameter, which in the described case is 103.6 mm. The wall thickness remains unchanged at 3.2mm.
Among the dimensions of the 110 mm sewer pipe, the length of the socket should also be highlighted. It can be normal or extended. In the first case, the length is 58 mm, in the second - 313 mm. The weight depends on the diameter. For example, one linear meter of pipe will have a mass within 1 kg.
What to look for when choosing
When choosing the described product, pay attention to the wall thickness. This setting will depend on the installation location. For external sewerage, a large thickness will be required. Otherwise, the pipe will not be able to withstand the pressure of the earth and temperature changes. In order to increase frost resistance, manufacturers often use a multilayer pipe, which can have two or three layers. The space between the layers is filled with foam material. The product eventually acquires the name sandwich. All this increases strength and resistance to low temperatures, but increases the cost.products.
When considering other sizes of 110 mm PVC sewer pipes, you should pay attention to the wall thickness. When laying internal networks, products with a smaller thickness are suitable. This is due to the fact that the system in this case is not subjected to critical loads. Some craftsmen, in an attempt to improve the functionality of the pipeline, mount pipes with a greater wall thickness in places where this is not necessary. This is impractical and can only lead to additional expenses.
Reviews on the sewer pipe from other polymers
The dimensions of the 110 mm sewer pipe socket, which were mentioned above, are not all that you should know when buying such products. It is also important for the consumer to take into account the fact that not only polyvinyl chloride can be the basis. Along with it, other plastics are also used. According to consumers, the most common is PE polyethylene. It applies only to pipes through which cold water will be transported.
With regard to cross-linked polyethylene, according to consumers, it is good because it is resistant to ultraviolet radiation. Such pipes withstand high mechanical loads and have a fairly high temperature threshold. Such products can be used at temperatures up to + 95 ˚С. The connection is made by soldering, and XLPE pipes can be used to transport hot and cold water.
The dimensions of the 110 mm plastic sewer pipe are now known to you. However, it is also important to knowwhat polymer products are made of. It can be based on PPE polypropylene. Such pipes are widely used in various industries, because, according to buyers, they have good mechanical and chemical properties. On sale you can also find pipes made of cross-linked polyethylene, which is called PB polybutylene. Such products are not durable enough, therefore, according to home craftsmen, they are not so popular. The structure has defects, the surface may have delaminations and cracks, which appear after several years of operation.
Such pipes are produced in small quantities. PVDF pipes have excellent chemical, physical and mechanical properties. It is a semi-crystalline thermoplastic that is even used in the pharmaceutical industry for pumping medicines. In view of the foregoing, it can be noted that many plastic pipes seriously compete with classic PVC products, but they have no competitors in terms of cost / quality advantages.
Cost of pipes
The dimensions of the 110 mm sewer pipe are now known to you. However, before buying it is important to ask about the cost. This question is the most interesting part for the consumer. For a pipe with the mentioned diameter, you will have to pay 165 rubles. for one linear metre. Prices for PPE pipes will be almost three times higher, although with a larger set of pluses. In this case, we can say that there isan abundance of benefits, but it's up to you to pay for them.
The final price of sewerage will be calculated with an eye to the installation of the system and sometimes adds unexpected somersaults to the estimate. For an initial assessment, you can take the option of calculating the construction of sewerage in the country. So, for pipes with their laying, you will have to pay 1,500 rubles. The cost of a drainage well in the composition is 37,000 rubles. This includes two rings, pump installation, concrete and earthworks. Additional costs for laying the system, commissioning, transportation costs, backfilling the station and removing soil will cost 15,600 rubles.
Red Pipe Features and Reviews
The dimensions of the 110 mm red sewer pipe will be the same as mentioned above. Additionally, it can be mentioned that the length will vary from 1 to 6 m. The wall thickness reaches 14.6 mm. The minimum value is 3.2 mm. Such pipes are fire resistant, they are not able to conduct electricity, which eliminates the need for additional electrical insulation.
Customers emphasize that there is no risk of corrosive decomposition by liquids or ground water during the operation of such products. The material is resistant to aggressive media, including solutions of s alts, alkalis, acids, gas and oil products. The dimensions of the 110 mm sewer pipe are not all that you should know before buying such products. As buyers emphasize, the pipes have a mechanical strength and rigidity that is higher compared to pipes made ofpolyethylene. These products have a low melting point. They are able to remain operational when heated up to + 120 ˚С. If this value is exceeded, then the form will be lost, hydrogen chloride gas will be released, which is harmful to humans.
The first signs of deformation will begin to appear below the mentioned temperature level when the heating reaches 65 ˚С. It is for this reason that PVC products are not used for laying hot water plumbing systems.
Rigidity criteria for red pipes
The price and dimensions of 110 mm sewer pipes are already known to you. But before buying, it is important to ask also what category the product belongs to in terms of rigidity. It can be thin-walled light, medium hard or thick-walled hard. The first type belongs to class L and has a stiffness index of 2 kN/m2. Thin-walled pipes of medium hardness belong to class N. In this case, the stiffness parameter is 4 kN/m2. The third variety is related to class S, and the stiffness index is 8 kN/m2.
In closing
PVC pipes are made from a thermoplastic that retains its shape after processing. Ethylene is the main component of polyvinyl chloride. Additionally, stabilized chlorine should be isolated. Additional additives allow you to achieve the best properties of the described products. Most often, these pipes are used forlaying of sewer networks. They are easy to install and low cost.
Recommended:
Sewer manhole: installation tips, features and specifications
Sewer manholes are a topic of active discussion at all times. Definitely an important component of any communication system. A person is trying to build it in a private house. Not a single apartment building can do without it. But not everyone understands how to properly install the hatch. Before starting work, it is worth identifying some important features and answering a few simple questions
Diameters and dimensions of cast iron sewer pipes. Types and features
Cast iron pipes are used today in the laying of external and internal sewerage systems. Products can be channelless and channel. Their service life can reach 100 years. Connecting elements and assortment of sewer pipes is determined by GOST 6942-98. After reading the documentation, you will be able to understand what parameters the pipes should have
Railway track is Definition, concept, characteristics and dimensions. Train dimensions and features of track facilities operation
Traveling by train through cities and towns, you can learn a lot of interesting and amusing things about the world of the railway. More than once, traveling people have asked themselves questions about where this or that railway track leads? And what does the engineer who manages the train feel when the train is just starting off or arriving at the station? How and from where do metal cars move and what are the ways of the rolling stock?
PVC sewer pipe 110 mm for the installation of individual systems
When creating communication networks for draining, it is allowed to use conductive elements made of various materials. However, the 110 mm PVC sewer pipe is very popular, as it is ideal for the installation of individual systems
Durite sleeve: description, characteristics, types, diameter and dimensions
With the development of various industries, there was a need for a large amount of fuel, as well as its supply. To ensure the transportation of harmful substances, several methods were invented, one of which was the delivery of raw materials through a durite sleeve
