2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
The 2-TP form (waste) was approved by the Decree of the Federal State Statistics Service. Rosprirodnadzor with its help collects and processes data related to the formation, use, disposal, transportation and placement of recyclable materials. The specified form has been put into circulation since 2004. Let us further consider the sample 2-TP (waste).
Basic concepts
Consumption and production wastes are the remains of materials, raw materials, semi-finished products, other products / products formed during use, as well as goods that have lost their consumer characteristics. Circulation is an activity in the course of which recyclables appear. It also includes operations for storage, transportation, neutralization, burial, use, collection. Hazardous are wastes containing harmful substances that have properties that can pose a threat to humans and nature. Such characteristics, in particular, include toxicity, fire and explosion hazard, etc. Hazardous waste may also contain infectious agents. Accommodationa specially equipped facility and intended for the placement of recyclable materials in it is called. It can be a sludge storage, a landfill, a rock dump, etc. Waste disposal is an activity for the disposal and storage of recyclables. The latter is the content of materials in specially designated facilities. Storage is carried out for subsequent neutralization, burial or use. To prevent the penetration of harmful/dangerous compounds into the environment, the waste is isolated. This operation is called burial. Waste can be reused to create products, provide services or work, as well as to generate energy and heat.
Subjects
Who delivers 2-TP (waste)? The list of subjects obliged to provide relevant information is defined in the above resolution. In particular, they include:
- Citizens engaged in entrepreneurial activities without creating a legal entity, registered in the status of an individual entrepreneur in the prescribed manner, whose work is related to the handling of consumption and production waste.
Agricultural enterprises report on the presence, creation and transfer to third parties (onstorage or for neutralization) of pesticides that are prohibited for use or have become unusable. Transport companies that carry out exclusively transit transportation of recyclable materials from the places of its formation to the sites of their burial, storage, neutralization, storage or disposal, which are not under their control, provide information about its receipt and transfer to other entities. Information on f. 2-TP (waste) is not presented by the authorities of culture and art, management, sports and physical education, enlightenment and education, insurance and other financial and credit institutions.
Composition of information
In f. 2-TP (waste) information is entered on all types of recyclable materials in circulation with a legal entity or individual entrepreneur, with the exception of radioactive substances. Information is not provided on the compounds entering the atmosphere and water bodies with effluents, the volume of polluted water transferred for treatment to other enterprises. The 2-TP (waste) report contains information on the formation, use, disposal and disposal of substances obtained during the treatment of wastewater and exhaust gases at the relevant installations and structures.
Company information
The 2-TP report (waste) includes information about the legal entity as a whole, that is, including data on its divisions, regardless of their location. If representative offices / branches are located within other regions of the country, then it is necessary to additionally provide information on the organization, not including information about the EP. Separate subdivisions located in other regions present f. 2-TP (waste) interritorial control bodies.
Address part
It indicates the full name of the company providing f. 2-TP (waste). The name is given in accordance with the constituent documents registered in accordance with the rules established by law. The short name of the legal entity is indicated in brackets. In the column "Postal address" the name of the region of the Russian Federation, the legal address and the postal code are written. The code part should be drawn up in accordance with national classifiers on the basis of a letter from the state statistics authorities on the inclusion of the organization in the USREO.
Information on production and consumption waste
Information is provided based on primary credentials and passport. All substances are grouped according to certain hazard classes and are reflected sequentially in f. 2-TP (waste). Filling is carried out in accordance with the accepted classification by type. The hazard class for the natural environment is determined according to the Federal Catalogue. If it does not contain the required information, then the criteria for classifying waste as hazardous are used, approved by Order of the Ministry of Natural Resources No. 511 dated June 15, 2001. The establishment of a class by a legal entity or an individual entrepreneur is confirmed by the territorial division of Rostekhnadzor.
Display indicators
The values by which the waste is characterized are indicated by weight in tons. After the comma in the figures leave:
- 1 sign - for substances IV and V class.
- 3 characters - for materials of I, II, III classes.
Waste, which is presented in the form of fluorescent lamps that are out of service and contain mercury, is shown by weight of the product. Information is indicated on the required number of forms. At the same time, a serial number is affixed to each of them at the top right. Form 2-TP (waste) is signed by the head of the enterprise or directly by an individual entrepreneur.
General rules
In columns 1 to 15 data are indicated, and in their absence, a dash is put. Separate lines are allocated for each type of waste assigned to the corresponding grouping according to the hazard class. Their numbers are indicated by three-digit numbers. For substances of class I, columns from 100 to 199 are used, for II, III, IV, V - from 200 to 299, 300 to 399, 400 to 499 and from 500 to 599, respectively. Lines 100, 200, 300, 400 and 500 reflect the total quantitative data on production and consumption waste, grouped by hazard categories.
Procedure for entering information
Form 2-TP (waste) is issued from the final column 010. It reflects the total number of materials of all classes. The information in column 010 on lines 1-15 must be equal to the sum of the information on pages 100, 200, 300, 400, 500 for gr. 1-15 respectively. In p. 100 according to gr. 1-15 reflect the total data for all wastes classified as class I. Information is formed by adding indicators for all their types that are in circulation with an organization or entrepreneur.
Lines 101-199
In columns B, C and D, as well as 1-15 indicate information for each namewaste I class. danger. Row numbers for data reflection are put down in strict order: 101, 102 and so on. The number of numbers should be equal to the number of types of materials. If only one type is in circulation, the information on page 101 in gr. 1-15 are repeated on page 100. If the enterprise does not have waste classified as class I, numbers 100-199 are not used when filling out the form.
Line 200
In columns 1-15 reflect the total data on the types of waste classified as class II. This information is formed by adding the indicators for the relevant materials that the organization / individual entrepreneur has in circulation. Pages 201-299 are listed in the same order as pages 101-199.
Lines 300-599
Columns 1-15 reflect the general indicators for materials classified as III, IV, V class. For each class, the data on waste in circulation at the enterprise are summarized. Information on the types of materials in lines 301-399, 401-499, 501-599 is indicated according to the rules given above.
Lines 600-602
Form 2-TP (waste) contains information on the number of disposal facilities for waste materials. They are indicated in line 600. In line 601, enter the number of burial sites for materials that do not comply with applicable standards. On page 602, the area of all these plots is indicated.
Counts
They indicate the following information:
- A is the line number.
- B - the name of the types of materials grouped by class.
- B is the exit code. It is brought in accordance withFederal Classification Catalogue.
- Г – number of waste property group. It is indicated in accordance with the passport.
- 1 - the total amount of materials that has been accumulated over previous years at the beginning of the current period. At the same time, information is reflected on waste, both located on the territory of the enterprise, and located outside it in storage places belonging to the organization. They can be warehouses, drives, and so on.
- 2 is the amount of waste generated during the current year. At the same time, materials received from third-party enterprises are not taken into account.
- 3 - the amount of waste received from other organizations for neutralization, disposal, subsequent processing, use, storage, transportation, and so on.
- 4 - the number of materials received during the current year from other countries by import.
- 5 - the amount of waste that was used by the enterprise during the reporting period for the production of any products or the provision of services, including for generating electricity and heat. This also takes into account the processing of materials accumulated earlier and received from third-party enterprises in the current year.
- 6 - the volume of waste that was completely neutralized during the reporting period, including at specialized facilities owned by the organization. Further movement of these materials (realization, processing, disposal, storage, etc.) is not reflected. Partially neutralized waste is shown in gr. 2, 5, and 7-15.
- 7 - totalmaterials that were transferred during the current year to third-party enterprises for burial, storage, neutralization, use.
- 8 - number of materials provided to other organizations for operation.
- 9 is the volume of waste transferred to third parties for neutralization.
- 10 - number of materials provided to other organizations for storage.
- 11 - the amount of waste that was transferred for disposal.
- 12 - the total number of materials posted at the facilities owned by the enterprise, including those rented.
- 13 is the amount of waste placed in their own storage areas.
- 14 - number of materials placed at the burial sites.
Column 15 indicates the amount of waste that was accumulated in the areas owned and leased by the enterprise at the end of the period. This indicator is the sum of the volume of materials available at the beginning of the year, appeared and received during it from third-party companies, minus neutralized and used, as well as provided to others and buried at our own facilities.
F. 2-TP (waste): timing
For untimely provision of information, the company may receive a fairly large fine. Delivery of 2-TP (waste) is carried out no later than February 1 of the next year. Information is provided on paper. Since November 2011, a special program can be used to generate the report.
User of nature module
It is a special system, the task of which is to partially automate the reporting process and the procedure for determining environmental payments. When compiling a document, the following information must be entered in the nature user module:
- Company details.
- Description of the field of activity.
- The current waste disposal limit.
- Permit for emissions to air or water.
- Information about limit extensions.
After processing the received data, the module offers the user an electronic number. It will be required for further submission of the report in paper form. To ensure correct and stable functioning, the nature user module should be updated periodically. You can download the system on the official portal of Rosprirodnazor.
Recommended:
Rules for filling out a certificate 2 personal income tax: step by step instructions, required forms, deadlines and delivery procedure
Individuals are required to transfer taxes accrued on their income to state budget funds. To do this, a certificate of 2 personal income tax is filled out. This document displays data on income and tax deductions of individuals. The employer is obliged to submit this documentation annually to the relevant regulatory authorities at the place of its registration. Instructions and rules for filling out certificate 2 of personal income tax will be discussed in the article
How to return insurance at Sberbank: types, procedures and a sample of filling out the form
In our time, credit institutions are actively trying to increase their profits in a variety of ways. One of them is the purchase by the client of the policy when applying for any banking service. In this regard, you need to know how to return Sberbank insurance in case of early repayment of the loan. In order to have a complete understanding of this program, you need to know what it is
Filling out TORG-12: rules for filling out a consignment note
This article discusses the primary documents, the TORG-12 consignment note, the rules for filling out, the form and the form, its purpose and the requirements of the inspection inspections
Samples of filling out a consignment note. Rules for filling out a consignment note
In order for the company's activities to fully comply with the requirements of the law, when filling out the documents, you must follow the established instructions. This article discusses samples of filling out a consignment note and other accompanying documents, their purpose, structure and meaning in the activities of organizations
Filling out a sick leave: the procedure for filling out, norms and requirements, an example
To receive a payment from the employer, it is necessary that the sick leave is filled out correctly. How to do this and how to work with sick leave in general is described later in the article. An example of filling out a sick leave will also be given below