Shaper of reinforced concrete products and structures: job description, duties

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Shaper of reinforced concrete products and structures is one of the most needed vacancies in the construction services market. The professionalism of these specialists has a direct impact on the quality of manufactured products. The job description of the enterprise helps the applicant to clearly understand what will be required of him in the workplace.

General provisions of the instruction

A job seeker is hired by issuing an order from the head of the company. Hiring is possible after the candidate is presented by an authorized person of the staff of the organization.

The vacancy for a molder of reinforced concrete products and structures requires a secondary vocational education. Applicants must also have at least one year of work experience. The amount of work experience may differ depending on the professional level.

The job description of the molder of reinforced concrete products and structures also provides for the order of subordination in the performance of professional duties. According to this document, the person holding this position reports to the shift foreman, foreman or other person holding a managerial position in production.

What should the applicant be guided by?

In any position, there are a number of documents and acts that serve as the main guide for a person in the performance of official duties. There is also such a list for the concrete molder.

In his work, the person holding this position is guided by:

1. Provisions of the charter of a company or organization.
2. The rules according to which the work schedule is established.
3. Orders and orders issued by the immediate supervisor or director of the organization.

It is worth noting that the job description is also a guide for the activities of the molder of reinforced concrete products and structures. This should definitely be taken into account when drawing up a work instruction and when hiring employees.

What should an applicant know?

When hiring, the employer imposes certain requirements on what the applicant must know before employment. This allows you to hire a qualified specialist who will be able to carry out his immediate duties without much difficulty.

Reinforced concrete formerproducts and designs should know the following:

1. Principle and arrangement of the equipment being serviced.
2. Requirements for the technological regulations for the process of forming a product or structure.
3. Rules for reading blueprints.

This list also includes knowledge of the order of disassembly and assembly of forms. Equally important in employment is knowing how to transport molds and finished products.

Main professional duties

The molder of reinforced concrete products and structures has a fairly wide range of professional duties that he performs in the course of his work. The job descriptions prescribe all types of work that need to be performed as part of the production of a particular company.

The list of the main duties of a molder of reinforced concrete products and structures includes:

1. Formation of complex concrete products.
2. Managing cleaning, lubricating and folding installations and molds.
3. Receiving forms and settings that have been processed.
4. Installation of mounting loops and stowing parts.
5. Laying reinforcement carcass elements with increased folding and fixation into shape or installation in the position provided by the project.
6. Fixing stressed reinforcement near the mold using a jack or tensioning stations.
7. Filling the mold with concrete mix and compacting the mix.
8. Installing earbuds andcores.
9. Slinging the product.
10. Grouping open areas of the surface of the molded product.
11. Disbanding of products with subsequent transportation to the processing post or in stacks.

In addition to the work activities listed above, the duties of the person holding this position include the management of all machines used to form concrete products. The exception is volume-forming machines.

Examples of work performed

For the completeness of the job description, the employer may post a list of products that the candidate will have to manufacture after employment. This allows the applicant to put together a more complete picture of the work within a particular organization.

Examples of work can be:

1. Solid blocks of internal walls or similar structures with voids, partition walls.
2. Foundation blocks with simple configuration.
3. Side stone.
4. Flat floor and roof slabs.
5. Tram, paving and road slabs.
6. Landings.
7. Piles reaching 6 m in length.
8. Steps and treads, sleepers.

Also, the list of manufactured products may include non-cantilever columns, lintels, racks, poles and stepchildren. This list may be supplemented by other options, depending on the specifics of the enterprise.

Basic rights

Any employeehas not only duties, but also rights. A person who fills the position of a molder also has certain opportunities during the performance of his professional duties.

The main list of human rights in this position is:

1. The right to demand periodic safety briefings.
2. Possession of all instructions, tools, protective equipment necessary for work.
3. The right to demand that management provide all the necessary funds.

A person holding the position of a molder is also en titled to get acquainted with the collective agreement and the internal regulations of labor activity. The main list of rights also includes making suggestions for improving working technologies. This list can be supplemented with other items that depend on the specifics of the organization's work.

What is the shaper responsible for?

Each position provides for some points for which the person who occupies it is responsible. An employee employed as a molder of structures and reinforced concrete products also bears his responsibility.

The scope of obligations for this position includes failure to perform or improper performance of their immediate duties within the limits established by labor legislation. Also, the molder is responsible for the misconduct committed during his labor activity. Offensesare established within the limits determined by administrative, civil and criminal legislation.

Another area of responsibility is the material damage caused. Its limits are determined by the current labor, civil and criminal legislation of the country.

Conclusion

Former of reinforced concrete products and structures is a position that has its own responsibility, rights and obligations. A properly drafted job description allows you to clearly limit this circle for employed employees and candidates. Also, the reviewed document allows you to show what exactly is required from the applicant in order to get a job in the company that compiled this list. For a molder of reinforced concrete products and structures, ETKS will help the manager prepare the correct instructions.