Window Podolsk plant: photos and reviews

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Plastic windows are slowly but surely entering our lives, displacing their predecessors. With the development of technology, the production of these structures is becoming more affordable and faster. Therefore, today every resident of our country can afford the products of the Podolsk window factory. What determines the cost of double-glazed windows, what are plastic windows and how long the process of their manufacture takes, we will consider right now.

What is an insulating glass profile?

In fact, this is the basis on which depends how well these windows will protect the room from cold and noise. To say that the profile is a common design would be wrong. In fact, this is a rather complex engineering structure, especially when it comes to plastic products from the manufacturer Podolsk Window Plant LLC, which has proven itself in the market.

Profiles are a cavity filled with transverse partitions, giving rigidity to the entire window structure. Between these partitions are air-filledchambers, just providing the necessary sound and heat insulation.

For better thermal insulation, a large number of such cavities are needed. In different profiles, their number may vary. Therefore, the Podolsky Window Factory offers a wide range of products for premises for various purposes, which differ in many ways, depending on what characteristics are important to you.

Enhanced thermal protection

In addition to the profile design, special seals and special glass provide thermal protection. Experts consider plastic windows 58-70 mm wide, three or four-chamber, to be the most suitable for the Russian climate. It should be noted that the company is an official partner of the Rehau concern. A high-quality German profile, on the basis of which plastic structures are created, was developed in the 70s in Europe.

For the installation, installation and operation of PVC windows of the Podolsk window factory, certain parameters are taken into account. In particular, among these requirements is a suitable temperature regime. Its boundaries: from +55 to -55 degrees Celsius. In fact, all regions of our country meet these conditions, so you should not worry about how long window structures will serve you.

Quality assurance

All products of the company meet the requirements of GOSTs and have certificates confirming this. In customer reviews of the Podolsky Window Factory, it is often said that before releasing the goods, the technical control department checks each unit of production. In addition, the companygives a guarantee for all types of products and for their installation for 5 years. During the entire warranty period, customers can count on free service if the need arises.

PVC window production process

An ordinary wooden window hides no secrets. Everything is simple here: the tree is processed, assembled into one whole and a finished structure is obtained. A good master, with all the necessary tools, can work such a window alone in one day. Things are different with pvc products from the Podolsk window factory.

The manufacturing process begins with measurements. The specialist comes and takes measurements from your window niches, talks about the design features, taking into account every little thing. Here you need to discuss all the details, express all your requirements: in which direction should the sashes open, which opening system do you prefer, the style of the window, its color. Next comes the choice of the components of the structure: PVC profile, fittings, double-glazed windows. After a thorough study, all data is transferred to the company, entered into the database and processed, after which the optimal result is displayed with all the drawings and the indicated prices. The buyer only has to wait until the window is completely ready for installation.

First of all, parts of the structure are produced, and then everything is combined into a single whole. This process at the factory is adjusted to automatism thanks to high-tech equipment from German and Italian manufacturers.

Production steps

First stage -production of pvc profiles. According to the order, they acquire the necessary form. If you need specially shaped, custom-coated embossed profiles, production time may be slightly longer.

At the same time, double-glazed windows are produced that correspond to this PVC profile. The process also depends on the special wishes of the client: properties, number of glasses in the frame, and so on. If you need a double-glazed window with increased thermal insulation, then the specialists of the Podolsk window factory use the so-called IR glass, which has special characteristics. The openings between the panes in this case are filled with an inert gas.

At the same time, fittings are selected. Specialists calculate what fittings need to be made so that it can withstand the weight of the window, and the special wishes of the buyer are also taken into account.

The final stage is assembly. It's not that hard anymore. Depending on the order, it is possible to install a specialized window sill. It should be noted that plastic structures can be installed in any weather. Neither frost, nor heat, nor torrential downpours affect the quality of work. Everything is done quickly and efficiently.

In conclusion, it is worth noting that despite the complexity of the technology and thanks to automated systems, the manufacturing process of Podolsky Window Plant products is fast, which reduces costs without loss of quality.

Installation of metal-plastic structures

The advantage of metal-plastic window productsPodolsky plant has been tested by more than one consumer. This is both ease of use, and reliable heat and sound insulation, as well as the safety of people who are indoors. Choosing a high-quality window profile is only half the battle, it is very important to install the window correctly, because its tightness and stability depend on it, and, accordingly, most of the functions.

Customers of the Podolsk window factory in the reviews do not recommend installing the window yourself if you do not have the skills of installation work with metal-plastic structures. Incorrect installation can not only worsen the tightness, but also damage individual parts of the window.

How is a metal-plastic window installed?

Installation of Podolsk window factory products can be conditionally divided into several stages:

1. First of all, the company's specialist measures the window opening. This can be done independently, if there is confidence in the accuracy of the measurements. But it is better to entrust the measurement to qualified specialists.
2. When the structure is ready and delivered to the site, the specialists dismantle the old window blocks. It is important to entrust this stage to experienced workers, because damage to the opening during dismantling can lead to difficulties in installing a new window.
3. Minor opening defects are removed and leveled with plaster or putty.
4. When installing a new product, the specialists of the Podolsky window factory, first of all,fittings are installed, then double-glazed windows, locks and additional parts. Then the workers make the final finishing of the window openings.
5. The last stage is a thorough sealing of the window - for this, a certain part of the space between the structure itself and the opening is blown with mounting foam.