Nail making machine - characteristics and general description

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Today, the most popular fasteners are nails, which are in great demand among people. They are used both in domestic situations and in construction. In this regard, we can say that they are able to bring producers a very good income. Making nails can be both large-scale and not quite so. It all depends on what initial contribution the manufacturer intends to make to this project. As a raw material for production, ordinary wire is used. The main aspect for a good start of business is the presence of people who will supply this wire at a not too high cost.

In order for your own production to be perfectly established, you will need to rent or purchase a room and buy a machine for the production of nails. Suppliers usually sell raw materials in the form of a reel, the weight of which reaches approximately one ton. The raw material is mainly low-carbon steel wire. If there is a machine, material and premises, then the production of nails will not require large physical costs. For production, it is necessary to have such a wire nailing machine, which has the following characteristics:

1. The diameter of one rod reaches approximately six millimeters.

2. The length of the produced nail can range from twelve to 320 millimeters.

3. In one minute, the machine can produce from one hundred to six hundred pieces.

4. The power of the machine can reach up to 20 kW.

5. The weight of the machine varies from one to two tons.

The machine for the production of nails works as follows: a wire is fed to the input of the machine, after which it is cut in the right place at the right angle. On the cut line there will subsequently be a point. After exposure to the other end of the workpiece, a hat appears. In principle, the manufacturing process is not characterized by increased complexity. The cost of the machine starts from one hundred thousand rubles. The nail production room can also be equipped with a special device for unwinding wire from a reel.

If it is planned to start a production that is not too large, then for good functioning it will not be necessary to hire a large number of people, only two employees will be enough. In addition, additional education from employees is not required, since the machine for the production of nails operates in semi-automatic mode.

The cost of production will be formed from the initial price of purchased raw materials. Usually one reel of wireestimated at an average of 23 thousand rubles. The diameter of the wire and the mass of the bobbin is one millimeter and, accordingly, seven hundred kilograms. For electricity, you will have to pay about three thousand rubles a month. The salary of an employee in a small production will take about twenty thousand rubles. About nine thousand rubles will be spent on renting the premises per month. If we take into account the factor that the cost of one nail is about ten rubles, then a machine for the production of nails will produce about three and a half tons of material per month. In order for a business idea to pay off in at least one year, it will be necessary to produce about four tons of products per month.