Polypropylene pipe 32 mm: description, application, installation features, reviews

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

In the modern construction market, 32 mm polypropylene pipes are confidently occupying high positions. Such building and repair material has long been very popular among many domestic construction companies and private builders, because it is easy to install and quite convenient to operate. With their appearance, one can forget about heavy and expensive metal pipes, the imperfections of which everyone has long been familiar with. In the article, we will study in more detail the properties and advantages of polypropylene products, the installation sequence and the area of \u200b\u200buse of the material.

Scope of application

Polypropylene pipes are used both in the engineering systems of residential buildings and in industrial areas to form a durable water supply and sanitation. Polypropylene pipes 32 are used for heating, to create other important engineering systems that allow you to maintain the comfort of staying in houses, cottages, dachas.

ForDue to special polypropylene and combined fittings, it becomes possible to reliably and easily install pipes made of polypropylene. The most important thing is the ease of replacement of polypropylene engineering systems when such a need arises. Very often, construction experts use 32 mm polypropylene pipes to repair networks that are made of metal materials, to replace their damaged sections.

Properties of polymers

The widespread use of fittings and pipes is due to the attractive characteristics of the material:

• Polypropylene pipes with a diameter of 32 mm are universal, that is, it is quite possible to use them in public, private construction and not only.
• The material is characterized by increased strength characteristics.
• Polypropylene is considered to be abrasion resistant.
• Pipes are completely safe even after long-term operation for the environment, in particular, humans and animals.
• Polypropylene has good sound absorbing performance.
• The installation of such pipes is simple and can be carried out by a master without many years of experience.
• The material is resistant to corrosion, which determines its durability.

Advantages of polypropylene over metal

A distinctive feature of the purchase of polypropylene pipes in comparison with metal pipes is their low financial costs, that is, the costs of transporting and installing light plastic piping systems. Connecting polypropylene pipes with your own hands is a fairly common thing in modern construction. And today, the technology of soldering polypropylene has been mastered by many craftsmen, which brings them stable and high profits.

The cost of such work (excluding material) averages 1000-1200 rubles per meter of 32 mm polypropylene pipe. In some situations, prices may vary depending on the complexity of the installation of pipes and the region of work.

Features of polypropylene compound

The process of soldering material is based on the connection of the heated ends of the pipe and fitting. For durable and competent soldering, you must follow some simple rules:

• polypropylene is brought to a viscous state before soldering;
• it is important to ensure a tight adhesion of the surfaces to be joined;
• after soldering, the master has literally a few seconds to align the pipe with respect to the fitting.

Types of polypropylene pipes

Today, the following options for polypropylene pipes are distinguished:

1. Thick-walled polypropylene pipes 32 mm. Such engineering systems are suitable for the formation of cold and hot water supply, the water temperature in which can reach only 70 degrees and where relatively low pressure can be observed. Such pipes are cheap, simply connected by soldering, and the coefficient of expansion of the material at high temperature is one centimeter per meterpipes. This quality makes engineering networks unsuitable for creating a heating system for different types of premises.
2. Reinforced polypropylene pipe 32 mm (with aluminum foil). Engineering networks made of such material are excellent for arranging hot water supply and heating. It should be borne in mind that the expansion coefficient of this type of material at a temperature of 70 degrees is only 0.1 cm per meter. However, there is one drawback - when soldering pipes with reinforcement, they must be cleaned before removing the aluminum layer. Such work is carried out with a special device - a shaver.
3. Reinforced polypropylene pipes 32 mm (with fiberglass or bas alt fiber). They are not much different from the previous type, but they have a slightly larger expansion coefficient. Advantage - no need to use a tool like a shaver.

Reviews of masters and users

Concluding the consideration of the issue of polymer engineering systems, it is worth noting that, according to reviews, products made of gray and white polypropylene are most often used to create heating and plumbing systems. As for the duration of their service, this property, oddly enough, is not considered important. The fact is that, subject to proper operation, pipes made of polypropylene will be able to last such a period of time as the average passes between major repairs of a particular property.

In the modern construction market it is quite possible to findcommon household polypropylene pipes, the diameters of which vary from 20 to 110 mm. However, for the installation of hot and cold water supply networks, as well as heating in an apartment, in a country house or in a cottage, in most cases there are enough pipes, the maximum diameter of which is 32-40 mm. The patency of such an engineering network is even enough to form a bed - a horizontal wiring from an elevator or water metering unit, which experiences heavy loads at peaks in fluid consumption.

If the question arises among consumers or craftsmen about which polypropylene pipes to choose, then today it still remains open. According to the reviews of experienced specialists, it is the polypropylene pipe, which is reinforced with fiberglass, that should be used, as it is considered the most reliable in many performance characteristics.