2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
Paronite ring gasket is a sealing product made of asbestos, which is designed to create a tight connection in pipelines. Due to its properties, these products are in high demand among enterprises and the population.
Description
Paronite is a sheet sealing material that is formed by pressing asbestos and rubber. Reinforcement with a metal mesh allows you to enhance the properties of the product.
The main purpose of the material is the manufacture of sealing components. At a certain pressure, paronite reaches a fluid mass. The specified material in a fluid state fills all the irregularities, thus forming an airtight connection.
Paronite is plastic enough. It can be cut and given a wide variety of shapes.
Using the product
Paronite gasket has a fairly wide scope. These are the metallurgical industry, the food industry, the oil and gas industry, and the public utilities sector. In the more common case, a paronite gasket is used to seal the water supply structure. Also, this product is used in various pumps, in gas-cylinder and heating systems.
Advantages and disadvantages
Paronite gasket has the following advantages:
- High temperature resistance. This allows them to be successfully used in various automotive parts and internal combustion engines.
- All these products, which are made by pressing asbestos fiber, are able to withstand high pressure.
- Paronite gasket retains its properties at different temperatures. Thanks to this small detail, high reliability and stability of the piping system is achieved.
Among the shortcomings, one can single out only a defect in production, as well as violation and non-compliance with the instructions and requirements for the operation of this product.
Varieties
The following types of the indicated item are currently in production:
- general purpose paronite gaskets (PONB);
- oil and petrol resistant (PMB);
- acid resistant (PC);
- reinforced (PA).
For temperature conditions 200 °C and pressure 40 bar can be usedunreinforced paranitic gasket. For higher pressure and temperature use this reinforced type product.
Manufacture of products
The use of precision equipment in the production of paronite gaskets allows you to create sealing parts for non-standard shaped assemblies. When using a high-level software and hardware device, the calculation of the most optimal algorithm for the production of a part is ensured. In this case, the waste is minimal. The paronite gasket is made using industrial plotter cutting equipment. This plant is quite efficient and allows the production of these products of various sizes and complexity. Therefore, products such as paronite gaskets, which are manufactured in accordance with standards or according to drawings, are quite effective.
Recommended:
Types of crushed stone: description, characteristics, scope and origin
Crushed stone is a crushed stone and is divided into fractions according to its size. Technical characteristics such as flakiness, density, frost resistance, fraction, radioactivity affect the areas of use of crushed stone and its cost
Main types of lumber, characteristics, classification and scope
Wood today is one of the most sought-after materials in many areas of human activity. It has a whole range of special features. Existing types of lumber are able to satisfy any needs of any industry. Their properties and classification deserve detailed consideration
Heat shrink tube: characteristics, scope and benefits
Heat shrink tubing is one of the most popular and widespread types of heat shrinkable materials on the Russian market. By its design, this element is characterized by high qualities of reliability and is used to change the diameter of the part (on which it is mounted) to one degree or another
Marking of bronze: characteristics, properties and scope
Due to its decorative features and many other properties, bronze has become popular. It is very difficult even for connoisseurs to name all the impurities and additives that are present in bronze alloys. This article will focus on bronze and its marking
What is the difference between granite and marble: characteristics, scope
Both types of stone have a noble appearance, are distinguished by reliability and practicality. They are resistant to mechanical stress and are easily cleaned of dirt, so they are practically indispensable in the design of facades. However, each of them has its own unique features, therefore, choosing the most suitable option, you should first find out how granite differs from marble