Gausmus "Jet": reviews

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Not every workshop requires a thickness gauge. For example, in the country, where from time to time it is necessary to saw a couple of boards, it is not needed at all, because such an acquisition cannot be called the cheapest. But if you decide that the machine should be purchased, then for a start it is important to get acquainted with its features and characteristics, as well as determine the upcoming scope of work.

Before making a purchase, you should know that the machines described can be classified according to the amount of load. If you are used to performing many tasks on your personal plot, then it is better to purchase a combined installation. But when it is necessary to process a large batch of wood from time to time, then you should pay attention to budget semi-professional type machines. Professional units are suitable for large workshops, for example, for timber processing plants. Among other offers of the market, it is worth highlighting the thickness gauge "Jet", which will be discussed in the article.

Reviews about the features of the JWP-12

You can buy this equipment option for 21,600 rubles, which, according to consumers, is an acceptable cost for such a device. The device is a portable tool for working in construction sites and carpentry workshops. With the help of the unit you can plan wooden blanks.

The design provides for a folding table for comfortable work. The thickness gauge "Jet 12" has a dust collection system to which you can connect a vacuum cleaner. According to users, this add-on is very convenient to use. If the model overheats, it will automatically turn off to avoid premature failure.

During operation, the equipment uses two knives, which are based on high speed steel. These elements rotate at a speed of 9,000 revolutions per minute, which ensures high quality processing. In one pass, according to home masters, you can remove 1 mm of the top layer along the width of the part.

Reviews on the technical characteristics of the model

Gauge gage "Jet", reviews of which you should read before going to the store, runs on 220 V. Planing depth reaches 2.5 mm. The maximum processing width, according to buyers, is quite large and equal to 318 mm. Case dimensions are 580x560x465 mm.

The design provides for a belt drive. The equipment weighs a little - 33 kg. The minimum thickness of the processed workpiece reaches 6 mm. Details, as emphasized by home craftsmen, move with a rather impressivespeed of 7 meters per minute. Thickness knives "Jet" have the following dimensions: 319x18x3 mm. The diameter of the suction hole is 100 mm. Power consumption is 1800W.

Feedback on the benefits of the model

If you do not know which equipment to give preference to, then you should consider the positive features of this or that option. The JWP-12 brand machine is no exception. According to buyers, opinions about it quite often help to make the right choice.

Among other benefits, buyers highlight:

• quick setup;
• easy to manage;
• precision in work;
• convenient transportation;
• compact design;
• vibration resistance.

As for quick adjustment, it is provided by a handle with which you can adjust the height of the knife shaft. The thickness gauge "Jet" has one important plus, which is the ease of management. This question will not cause difficulties for the consumer, because there is only one button to start and stop.

On the side panel is a millimeter scale for precision work. Customers love the ease of transport. It is guaranteed by the handles located on the sides of the case. The design is quite compact. The falling and receiving tables are folding, thanks to which the operator can fold the structure if necessary for transportation or storage. When assembled, the machine is quite small.

It is resistant to vibration during operation. Thisfeature is provided by holes in the base of the unit. With the help of them, the device is attached to a support or workbench with anchor bolts.

Feedback on the main features of the JWP-16 OS

The manufacturer's alternative offer is the Jet thicknesser JWP-16 OS, which, according to consumers, has a rather high cost of 99,800 rubles. The unit is a professional solution and is suitable for use in production environments where planing of workpieces up to 15 cm high is required.

It is based on a powerful engine that is able to work stably under high loads for a long time. Depending on the size and hardness of the workpieces, the operator can choose the feed rate, which is 5 or 6 m per minute.

The thickness gauge "Jet" has smooth steel shafts that do not damage the part in any way. According to the masters, this contributes to a uniform supply of the element to the knife shaft. The tables are removable, which makes it easy not only to transport, but also to store.

Reviews on the technical characteristics of the model

In order to form a correct opinion about the JWP-16 OS machine, it is necessary to consider its technical characteristics and get acquainted with the opinions of consumers about them. This machine is thickness gauge and provides processing width up to 405 mm. Planing depth is 5 mm.

The cutterhead rotates at 4,500 rpm. You may be interestedthe size of the knives, which is equivalent to 410x25x3 mm. The overall dimensions of the machine itself are 1220x813x1295 mm. According to consumers, the weight of the equipment is quite impressive and is equal to 215 kg.

Benefit Testimonials

Among the main positive features of the above model of the machine, consumers consider:

• long service life;
• easy to manage;
• smooth tuning;
• convenient feeding of blanks;
• rigid construction.

As for the service life, it is extended thanks to the stiffening ribs and ventilation holes. The engine is effectively cooled during operation. Operating the equipment, according to the operators, is quite simple. This question will not cause difficulties, because there are a minimum of buttons to stop and start.

Setting is smooth. The rotating flywheel is responsible for this. You can supply blanks using a table equipped with movable rollers. The design is characterized by high rigidity. This feature is guaranteed by metal ties.

Feedback on the main features of JJ-6L-M jointer

You can buy this jointer-thickness gauge "Jet" for 51,500 rubles. The equipment is a semi-professional device, which is characterized by convenience and accuracy of operation. The unit is powered by a powerful asynchronous motor, which contributes to efficiency and high reliability.

The model has a casing forchip collection. According to consumers, this allows you to keep the workplace clean. The tables are equipped with adjustable screw mechanisms. They can be adjusted in height. To cope with this work, according to the masters, you can quickly and easily. To change the angle of inclination, the manufacturer provided for the presence of a planer stop.

Specifications reviews

The picture won't be complete if you don't look at the main specifications. Consumer opinions will be an excellent addition to them. For example, the planing depth, according to those who have already experienced the described device, is quite impressive and reaches 3 mm. The maximum processing width is 150 mm.

Knives have the following parameters: 155x19x3 mm. The size of the desktop is also important, it is 1215x182 mm, but the overall dimensions of the machine body are 1215x650x1050 mm. It is important to take into account the reviews also about the impressive weight, it is equivalent to 103 kg. The diameter of the suction hole is 100mm.

One of the common faults is the traction shaft brake

If during the operation of the machine you notice that the draft shaft of the thickness gauge "Jet" slows down, you can mill a new keyway or weld the end of the shaft by turning a new veneer and thread. Keep in mind that the metal of the shaft is very soft.

Some masters carry out argon welding. It is important to take into account that during surfacing the shaft can lead, re-centering will occur. In this case, the shaft must be machined in the centers until the seat is clean.

Bconclusion

You will certainly need spare parts for the thickness gauge "Jet". Therefore, when buying equipment, it is important to evaluate how much their cost is higher or lower compared to consumables for equipment from other manufacturers.

For example, you can buy carbon brushes for 120 rubles, and a ball bearing for 210 rubles. A bevel gear costs 120 rubles, and a chain sprocket costs 150 rubles. A plain bearing, also called a bushing, will cost 120 rubles. You can purchase a chain and an overlay for a pulley for 740 and 300 rubles. respectively.