2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
For lovers of travel, such a device as a gas stove is one of the most necessary, because it is on this device that you can quickly cook food almost anywhere. Boule is a cottage or a folding table by the car, it doesn’t matter - such a stove operates in a single way. And autonomy from a centralized gas supply system is provided by a small propane tank. However, the gas in it is not eternal and sooner or later its amount in the container will not be enough for cooking. In such cases, the gas cylinder is refueled. Let's see how it's done.
Installation location
First, the container is placed upside down on a flat and stable surface. In order not to damage the valve, one of the most effective methods of "hanging" is the method of using strong ropes. For portable cylinders (as a rule, their volume is about 5liters) many manufacturers provide a stand for such cases in advance. It is already included with this device. If there is no such stand, you have two ways out of the situation - make this element yourself or use a cord to lift it. In general, there are a lot of options for hanging a balloon in the upside down position. You can use any method, but remember that the position of the cylinder should be as stable and reliable as possible.
About filling system
After that, you need to assemble the elements of the casting system. The device with which the gas cylinder is filled consists of 2 hoses, one adapter, a threaded head and a tap. In this case, you should not use plumbing parts, as this will not guarantee a long and flawless operation of the filling system mechanism. All adapters, taps and cuffs should be selected from gas equipment devices (preferably from those devices that interact with liquid nitrogen). At the same time, it is undesirable to use a reducer in the system, since filling the gas cylinder will be very, very long.
How to put all this device together? First we will need to put an adapter on the thread of the cylinder. Here, to perform the work, you will need a special valve that regulates the gas supply. It is not recommended to use the cylinder valve itself, since it simply fails when performing such work. Next, you need to take care of installing the head on the gas thread. For this you canborrow a mechanism from a conventional heating pad or cutter. By the way, the head taken from the last type of device is less expensive to install, since it already has everything you need to attach to the hose. With a burner, you will have to suffer a little. As for the collet, it is best to use metal or an alloy, but in no case plastic. Everything, at this stage, the gas cylinder is refueled. As practice shows, it takes no more than 1 day of free time to create like a tanker.
How much does it cost to refill a gas bottle on professional equipment?
If you do not want to make such a device for self-refueling, you can use the services of companies. Now almost every city has a gas cylinder filling station that provides such services. One refill costs 200-300 rubles.
Recommended:
The main parts of the aircraft. Aircraft device
The invention of the aircraft made it possible not only to fulfill the most ancient dream of mankind - to conquer the sky, but also to create the fastest mode of transport
Filling out a sick leave: the procedure for filling out, norms and requirements, an example
To receive a payment from the employer, it is necessary that the sick leave is filled out correctly. How to do this and how to work with sick leave in general is described later in the article. An example of filling out a sick leave will also be given below
Responsibilities of the HR department: everything has become more difficult and more important
If you look back a couple of decades ago, you can see that since then the requirements for human resources departments have increased significantly, these changes have affected the responsibilities of the personnel department
Chrome plating parts. Chrome parts in Moscow. Chrome parts in St. Petersburg
Chrome plating of parts is an opportunity to give them a new life and make them more reliable and of high quality in operation
How to work in a taxi: the device of the service, the necessary conditions and tips for beginners on how to earn more
Moscow is a city of crazy opportunities and a rapid whirlpool of events. This is a metropolis where hundreds of thousands of people come to look for highly paid jobs and self-realization in the professional field. And one of the most demanded professions here is a taxi driver. But how to work in a taxi in a million-plus city with its frantic pace, long traffic jams and incredibly difficult traffic control conditions?
