Setting up MTS Internet on your phone: there is nothing easier

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Setting up MTS Internet on your phone is a fairly simple operation, which in most cases happens automatically. But there are exceptions when something goes wrong. In such cases, you must do it manually. However, there is nothing complicated about this, anyone can easily cope with this task. It is she who will be described in stages within the framework of this material.

Can the phone?

First you need to know if your phone supports wireless data transfer. Although the 20th century is in the yard, such devices are still not uncommon. These are ordinary "dialers" that are great for telephone conversations and SMS exchange. They are not designed for more. They do not support wireless data exchange and as a result, setting up the MTS Internet on a phone of this class is impossible. You can find out detailed information on this matter in the instruction manual for the device or from the manager in the store. In extreme cases, this information can be clarified with the operator by calling 0880. The call, of course, is free.

Automatic

In most cases, after installing a SIM card and when you first start the device, MTS automatically checks forrequired values in your database. If they are found, then the MTS Internet settings on the phone are sent to the subscriber. Then you just need to accept and save them. Then you need to issue a traffic permit. To do this, call 0880 (contract) or 0022 (for prepayment) and, following the instructions of the autoinformer, fill out an application. With the correct inserts and after calling the service numbers, it will be possible to launch the browser and try to visit some site. It will have to open. An important nuance for smartphones is that in order to access the Global Web, a checkbox must be selected that allows data exchange. This option is set in the settings. If this did not happen, then setting up the MTS Internet on the phone can be done manually.

Manual

It is much more difficult to perform this operation manually. To do this, go to the address: "Settings / Configuration / Standard settings" (the path may differ depending on the model: in this case, this is true for Nokia owners). Open any of the available connections and fill in the fields. In the name of the connection, enter "MTS Internet". The access point in this case is internet.mts.ru. Next, we dial the data channel, which in our case is “packet data (GPRS)”. Login and password are identical - "mts". Set the “Password request” item to “no”. All other parameters are left unchanged. This completes the manual setup of the MTS Internet on the phone. You can launch a browser and go to any site. At the same time, one should also not forget thatthe service can be disabled if there is not enough money on the account. This point also needs to be taken into account.

Results

In the framework of this article, the Internet connection to the MTS phone was described in stages. Most often, this operation occurs automatically, without the participation of the subscriber. It is enough just to accept and save the accepted values. If something went wrong, then we do the configuration manually. In extreme cases, you can call the operator at 0880 and consult.