Do you know how to process Victoria in the fall?

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Berry crops after fruiting need care, Victoria is no exception. How to process Victoria in the fall? What measures need to be taken to ensure next year's harvest? Let's find out.

After harvest

The last berries have been collected. Now you need to remove the weeds and loosen the ground near the bushes. The loosened soil is covered with mullein or horse manure for fertilizer. The first antennae, not even grown, are placed on top of the manure. The rest do not touch, since adult mustaches can take root if they grow cork roots. If they do not take root before winter, then in the spring they are removed.

Summer residents ask: "How to process Victoria in the fall?" It is necessary to clear the passages between the beds from weeds. Pour chips, sawdust, branches onto the resulting paths. Such mulching will retain moisture in the soil and prevent weeds from multiplying, which interfere with the strengthening of young bushes. The sooner weed the beds, the better the new bushes will be able to strengthen and grow. Manure will not only fertilize the soil, but also maintain the necessaryhumidity.

Crop care in October

How to process Victoria in the fall, namely in October? At this time, the soil is mulched with a layer of 5 cm. Sawdust or peat are best suited for these purposes. In the future, the beds are covered with spruce branches. In autumn, they also prepare the soil for planting Victoria in the spring. To do this, in the middle of the season, the land is plowed 30 cm, but not loosened. In this form, leave for the winter.

How to process Victoria in the fall, if the weather is warm, dry? In this case, it is recommended to shed the culture well: the soil should be wetted by 30 cm or more. If flowers appear on the plant during warm days, then they must be removed. The aisles are dug, and the beds are sprinkled with manure, Kemira fertilizer and a layer of ash.

Victoria can be fed with humus. To do this, in a deciduous forest, the top layer with dry, undecayed leaves is removed and discarded, after which the deciduous humus is taken and applied under the culture. The result is always stunning.

How to treat Victoria after fruiting from pests and diseases? To prevent the development of diseases and the reproduction of pests, Victoria is sprayed with Fitosporin. From the appearance of gray rot, a solution of water with copper chloride saves, from powdery mildew - water with potassium permanganate or colloidal sulfur. There are ready-made preparations for processing Victoria after harvesting - Aktara, Intavir, Zeon, Karate.

Victoria care in November

Howprocess Victoria for the winter? This is the most pressing question at the end of the autumn season. Remontant varieties are covered with a film. In November, snow guards are installed, as well as traps for small rodents. At the end of autumn, the beds can be covered with needles, and in the spring it can be removed from the base of the bushes to quickly warm the earth. When snow falls, it is thrown over the area where Victoria grows and compacted.

If the berries are grown outdoors, their roots are sensitive to frost, as they are shallow. In the northern regions and those places where severe frosts are observed, the beds should be covered with straw or brushwood. "Insulation" is not crushed, so as not to interfere with air access. Lack of oxygen leads to the development of fungal diseases. For shelter, you can also use burlap, matting or cotton canvas. You can not use a tarpaulin for insulation, as under it the Victoria rots and rots.

Easy care, prevention of pest reproduction, shelter beds for the winter will ensure a good harvest next summer. The more we take care of the plants, the tastier and better the berries grow.