2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16
When creating communication networks for draining, it is allowed to use conductive elements made of various materials. However, the 110 mm PVC sewer pipe is very popular, as it is ideal for the installation of individual systems. The material used has good performance characteristics, and the presented diameter allows for normal throughput.
Product Advantages
Using 110 mm PVC sewer pipes for an autonomous network, it is possible to achieve high-quality drainage of domestic wastewater from a private house. Systems made from them serve for a long time without additional maintenance. Of the main advantages, it is necessary to highlight:
- biological and chemical resistance;
- sufficient strength;
- low cost;
- availability of spare parts;
- easy mounting method.
During the work, the elementsconnected by means of sockets, which are located at their ends. This option is very convenient. The watertightness of the joints is achieved through special gaskets and hermetic means.
Outdoor Items
From the street side, soil affects the fragments of the sewage system. Therefore, PVC sewer pipes 110 mm external are used there. They have a multi-layered structure that allows them to withstand the pressure of the soil. They can be distinguished from other analogues by their orange color.
For laying under normal conditions, products marked SN4 are used, the purpose of which is to install outdoor networks with a normal load. Such elements are able to withstand ground movements and the impact of light vehicles.
Products for internal use
PVC sewer pipes 110 mm are also indispensable for indoor installation. The internal laying method does not imply additional mechanical action, therefore it does not make much sense to achieve too high strength characteristics during manufacture. Such elements are single-layer and, as a rule, have a gray color.
Accessory kit
The consumer is invited to purchase 110 mm PVC sewer pipes and fittings to ensure the connection of conductive fragments to each other. A standard set of additional elements makes it possible to arrange systems of different configurations.
You can change the movement of fluid inside the pipeline using a special outlet. The angle of rotation of a given part usually varies within a certain range. Accession of additional elements is carried out by means of tees. Peripheral branch parts are needed to create complex sewer networks.
The revision is intended to provide access to the inside of the pipelines. This may be required for cleanup activities. If necessary, the plastic cover is easily unscrewed, after which an analysis is made for blockages in the system.
To combine 110 mm PVC sewer pipes with elements of a different diameter, a reducer is used. However, in most cases, they do without installing it. The plug is used to close the holes at the ends of pipes.
To install the taps directly in two planes, special crosses are purchased. The adjoining hole can be positioned on the left or right, so that the conductive elements up to the plumbing fixtures can be placed in the optimum position.
Sealing system at joints
In order for the 110 mm PVC sewer pipe to be tightly docked with the rest of the system, rubber rings must be used. With the help of such seals, it is possible to provide reliable sealing at the joints. These gaskets are able to withstand exposure to many aggressive substances.
Along with the mainO-rings, by their function, allow to achieve high resistance to tensile loads occurring during operation due to vertical and horizontal ground movements.
Storage rules and transportation features
Each 110 mm PVC sewer pipe must be delivered to the work site safe and sound. This can be done subject to the basic rules of transportation. If the products will be installed after some time, then it is also necessary to ensure acceptable conditions for their storage:
- Elements should be placed on a flat area. From below, wooden blocks should be placed every 100 cm. It is best to remove the factory packaging immediately before installation work.
- When transporting products that are not fastened together, it is required to install additional supports on each side with a step of no more than 200 cm.
- When manually unloading the pipes, it is recommended to remove them from the machine in a horizontal position. It is not allowed to pull them off at one end. Particular care must be taken if the temperature outside is sub-zero.
Final part
Although the 110 mm PVC sewer pipe is actively used in the installation of individual systems, this does not mean that it cannot be used in the installation of networks of industrial and commercial buildings. However, such a diameter in this case is only suitable for organizing internal wiring. For wastewater disposal outsidebuildings are usually stacked elements with a large section, providing better throughput.
Recommended:
Casaflex pipe: a flexible solution for heating systems
The Swiss trade brand CASAFLEX was created as a new technical solution based on the specific conditions for installing heating networks in the European part of the continent and reducing dependence on expensive energy sources. The trademark is owned by the Swiss company Brugg Rohrsystem AG, which is part of the holding group BRUGG Group. Today CASAFLEX is the leader in the technology of production of heat-insulated flexible pipes "Isoproflex" and "Casaflex"
Sewer manhole: installation tips, features and specifications
Sewer manholes are a topic of active discussion at all times. Definitely an important component of any communication system. A person is trying to build it in a private house. Not a single apartment building can do without it. But not everyone understands how to properly install the hatch. Before starting work, it is worth identifying some important features and answering a few simple questions
Aspiration systems: calculation, installation. Production of aspiration systems
Aspiration systems are systems that are designed to purify the air. The use of these installations is mandatory at all industrial enterprises that are characterized by harmful emissions into the atmosphere
HDPE pipe: do-it-yourself installation, installation features and instructions
When HDPE pipe is installed, the installation is done mainly by welding or compression fittings. If the installation rules are followed, the connections will be airtight and durable for many years
Sewer pipe 110: dimensions, diameter, specifications and reviews
Practice shows that when laying sewerage systems, 110 mm pipes are the most popular. These products are used for the installation of various parts of the pipeline. The connector for connecting the toilet to the sewer has just such a diameter, which can be said about some outlets for bathrooms and showers