Glass matting paste: an overview of the best manufacturers and application features

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Frosted glass in the interior of the premises are used quite often. Such elements make the design of rooms more original and attractive. Frosted glasses are, unfortunately, much more expensive than ordinary ones. Not all owners of houses and apartments can afford to buy such decorative elements.

However, it is not necessary for property owners to deny themselves the opportunity to diversify the interior with frosted glasses with a lack of funds. The way out in this case is extremely simple. The owner of the apartment only needs to purchase ordinary glass and treat it with a special paste. This tool is relatively inexpensive. At the same time, it is extremely easy to use glass matting paste.

What is the remedy

Many manufacturers supply matting pastes to the market. You can buy funds of this variety in almost any city in the country. Glass frosting paste is sold in Moscow, St. Petersburg, Yekaterinburg and other megacities. Such funds are usually offered in constructionsupermarkets.

For example, you can buy matting paste for glass in "Leroy Merlin" - a chain of stores for home and garden. Such outlets are available in many cities of Russia. If you can’t find pasta in a regular supermarket in your city, you can order it online at any time. The composition of such funds is usually very complex. After all, it is not enough to make glass frosted using such a paste. It is also important to consolidate the effect for many years.

The companies supplying them to the market develop their pastes in any case in such a way that they have the lightest possible structure. Such funds are usually not too viscous. A thick agent would be applied to the surface in strips. Light pastes are distributed evenly over the treated glass. That is, it is very easy to work with such tools.

Only products intended for application on vertically mounted glass are thick enough. Such matting pastes should not be too liquid, because in this case, when processing the surface, they would simply begin to flow down.

Top brands review

Good reviews from consumers have earned this variety from many manufacturers. For example, there are very good reviews on the Web about pasta brands such as:

• "Aqua-Color";
• Sammaker;
• Velvet Class.

All these manufacturers supply the market with sufficient quality and at the same time not too expensivefunds.

Aqua Color paste

The tool of this brand is popular with consumers, including the fact that it can be used to decorate glass in a very beautiful and original way. For example, on sale today there are pastes from this manufacturer with a terracotta effect.

Sammaker Lineups

The products of this brand have earned good reviews from consumers, primarily for their convenient consistency, the most even distribution over the surface and low cost. Consumers and accessibility are attributed to the advantages of Sammaker pastes. It will not be difficult to buy such a composition in the store at any time.

Velvet Class pastes

A feature of such pastes for glass, among other things, is the most homogeneous consistency, which allows you to work with both horizontal and vertical surfaces. Matte finishes made with this product are pleasantly velvety.

Can you make your own pasta

If you wish, you can make such a tool simply at home on your own. In order to make matting paste for glass, you need to prepare:

• barium sulfate - 15 parts;
• ammonium fluoride acid - 30 parts (NH-4-F-2);
• modified starch - 5 parts;
• distilled water - 10 parts.

Mixing such ingredients when preparing pasta should be strictly in a certain order. Do mattingat the same time, the product relies exclusively in plastic containers.

Make a matting paste for glass with your own hands as follows:

• pour crushed ammonium into a cup;
• dilute this powder with distilled water;
• add barium and starch to mixture.

In the process of cooking the pasta, it must be constantly stirred gently. In the end, the product should turn out to be absolutely homogeneous. In order for the paste to subsequently last on the glass as long as possible, it is additionally heated for a short period of time.

Preparing for processing

When buying a matting paste for glass, first of all, you need to look at what kind of surfaces it is intended for - horizontal or vertical. Actually, the technology of glass processing with both viscous and less dense compositions is the same.

Preparation for matting is usually done as follows:

• the glass is thoroughly washed and degreased with medical alcohol;
• the surface is thoroughly wiped using microfiber cloths;
• In order not to leave fingerprints on the glass, wear medical gloves.

What kind of glass can be frosted

In some cases, this type of paste cannot be used for surface treatment. In most cases, only simple silicate glass is allowed to be matted with this type of product. In any case, for boron-containing or chemically resistant, such compounds are never used.

When choosing glass for matting, among other things, you should pay attention to its quality. The low-grade material of this type has, unfortunately, not a very homogeneous structure. And therefore, of course, it will not work to matte such glass with high quality.

Processing technology

Actually, glass matting itself with paste is usually produced as follows:

• thoroughly knead the product until all lumps disappear, if any;
• apply the paste with a rubber spatula immediately to the entire surface of the glass;
• distribute the paste as evenly as possible.

Matting glass with pastes is allowed only with plastic or rubber tools. After 10-15 minutes after application, the remnants of the product should be removed from the glass. It is best to use the same rubber spatula.

Helpful tips

The rest of the paste can be placed in a separate plastic or glass container. Means of this type can be reused 2-3 times. If the paste is not supposed to be used again, its residues from the glass can simply be washed off with running warm water. When reusing the paste residues, they must not be mixed with the original composition. When using a cold agent, the treated surface will subsequently turn out to be quite smooth. If you want to make the matting more abrasive, the paste must be heated to 60 ° C before application.

Drawings

Fully frosted glass willlook quite attractive in the interior. But if desired, such decor can be made even more beautiful and attractive. To do this, with the help of paste, you just need to apply some pattern or pattern to the glass.

As a stencil for making such a decor, you can use, for example, any self-adhesive film. Such material, if necessary, will be easy to purchase at a low price in absolutely any building supermarket.

The pattern for glass can be found on the Internet. The found drawing will simply need to be printed on thick paper, and then transferred to film. Next, you should cut out the elements of the pattern in the appropriate places in the self-adhesive material. Actually, matting itself when using a template is carried out using the same technology as when processing the entire glass completely.

Safety & Storage

Good quality matting pastes do not cause any particular harm to the respiratory tract or skin. But you still need to work with such a tool with gloves. If the composition gets into the eyes, they should be rinsed immediately with warm water.

Store frosting pastes for glass of most manufacturers is allowed at temperatures from +15 to +40 °C. Of course, you need to keep such funds in the house in a tightly closed airtight container. If this condition is not met, the composition will change its viscosity, which will subsequently negatively affect the quality of glass processing.