AquaShield anti-scale filters: owner reviews, installation tips

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Any person is so spoiled for convenience that it is not possible to think about his own apartment, dacha or house without communications, timely supply of water or heat. Fortunately, today progress has gone so far that it is possible to bring all the resources and communications necessary to a person in any, even the most difficult conditions. They manage to heat rooms even in the far north, where the temperature reaches -50, and any pipes burst. But even with this development of science and technology, there are still questions about the quality of the services and goods supplied. And not just the quality of communication materials, but the quality of the water resource itself. Water is not cleaned so well today that the consumer, without fear, can drink it, cook from it. Even washing and ironing without fear will not work. Suddenly, the water has a high threshold of calcification, and after a month you will have to simply throw out some things, and take the washing machine, like an expensive iron, for repair. And the machine weighs a lot, you will have to fork out for one transportation.

Ways to solve lime problems: remove scale

The sphere of softening and purification of water resources in Russia today entersqualitatively new level. There are manufacturers who conquer not only the domestic market, but also enter the market of fastidious European and American consumers with their goods.

Among the Aquaphor and Geyser filters, the competition is quite strong, but probably only the AquaShield anti-scale filter can oppose them. This is an electromagnetic development of the Russian Institute. This device can be purchased in Russia. And, therefore, it is much cheaper than foreign counterparts. Although the developer is located in Ufa, you can get AquaShield even in Crimea.

In addition to softening devices, the problem of water hardness can be solved in other ways:

• Permanent purchase of water.
• Manually removing plaque.
• Affordable home prevention - vinegar, s alt, sand.

Effectiveness of all these ways to deal with plaque is low. So far, nothing better than filtration and softening procedures have been invented. And at the same time, reagentless devices like AquaShield have plenty of advantages over other devices. Although those positions do not give up, despite the shortcomings.

New generation filter: how does AquaShield attract consumers?

Telling about the merits of this or that product, one cannot fail to mention the very principle of operation of the AquaShield anti-scale filter. After getting acquainted with it, the process of the existing consumer opinion becomes more understandable.

How is the process of irradiation of water contaminated with lime? The device does not require any special manipulations. It is mounted, plugged into an outlet, andpowerful, permanent, magnetic core comes into play. Under its influence, the s alts inside the contaminated water also begin to change. Moreover, their standard behavior for sticking and settling does not change. Their new silhouette is now in the form of a thin needle without an eye, unable to stick to the heated surface. In this state, s alt needles can only scratch surfaces with old s alt that has settled and hardened to the state of gypsum.

To overcome such deposits - oh, how difficult. But time and a new form help the irradiated s alt-needles. They very gradually, but stubbornly loosen the sediment. And after about a month, the consumer sees the first results of the operation of such a contactless device. Loose old scale in the form of sand and pieces begins to wash out of household appliances.

The huge advantage of this softening process is that new s alts do not stick to the walls, but help the consumer to remove unpleasant deposits without his participation. And moreover, unlike a person, water can easily reach any nooks and crannies of the plumbing and heating or heating system. There is no need to dismantle bulky and heavy equipment and stop the entire production process.

But some maximally idyllic picture comes out. But in fact, there are also negative aspects of such an impact on water. Irradiation is safe for humans, but there is not even a simple filtering process. That is, inside the water, all hardness s alts remain in place. This only says one thing. Electromagnetic devices work great at a technical, industrial level, but forof obtaining such vital good drinking water, they are still rather weak. You will have to supplement them with other softening settings to complete the picture.

Consumer feedback on "electromagnetic uniqueness"

Electromagnetic anti-scale filters ("AquaShield" and not only) have recently become overgrown with legends. Many do not trust such a “WOW” effect from the operation of the device, many consider it to be greatly exaggerated. But those who have already tried to use such devices leave mostly good reviews.

AquaShield's famous clients include well-known gas producing companies and oil refining giants. Do not remain aloof from the reviews and various PREZHO, and municipal services, whose main task is to provide their areas with hot water and heating in a timely manner.

Many reviews indicate that the number of anti-scale flushes has decreased significantly. Control measurements of lime deposits have become less frequent. The surfaces of the equipment have become strikingly cleaner. Heat exchangers began to work more efficiently and quickly. And at the same time, almost no one calls special teams to stop and clean the systems.

Reviews also indicate that AquaShield works well with heat exchangers. The latter do not have to be dismantled even in the hottest season in order to eliminate the old lime dust. By irradiation, the device gradually cleans the rather complex design of a plate or disk heat exchanger. For industries such as heating and water supply, this treatmentthe effect of the descaling filters is the main advantage when choosing the right softener.

Features of operation and installation of AquaShield filters

When working with such small devices as "AquaShield", the consumer must also remember the rules for the operation and installation of these devices. Although permanent magnets are very unpretentious in use, but one wrong move, and the device will stop generating useful radiation. Or it will itself become weak and… useless.

The first thing that attracts attention is the installation of systems. At the first glance at a small AquaShield device with some kind of wires, the consumer does not immediately understand what and where to attach. Therefore, installation should always be carried out strictly following the requirements of the instructions that come with this device.

Installation of the AquaShield scale filter can be done on pipes of any diameter and made of any materials. True, next to the device to be protected, there should be some free space. The device is mounted through the hole located on the rear panel. To do this, you will have to drive a nail or screw a screw into the wall. You can also attach the device to the hook.

The wires that come from the body should be wound around the irradiated pipe. Moreover, one wire is wound very tightly between the winding turns, in one guiding direction. The other wire is wound in the opposite direction. The ends of the winding are necessarily fixed with plastic rings. In case of need, you can also fix them with electrical tape.

After all the manipulations, the scale filters are connected tonetworks. The irradiation process has begun. For the first week and a half, there will be no special effect and WOW results. Which actually gives rise to unpleasant rumors about the device. But gradually, new s alts will begin to tear off old deposits, and the long-awaited effect of purification and increase in the efficiency of the device will come.

Since the devices are equipped with a powerful magnet as the core, the consumer needs to be careful with sensitive devices and gadgets. This kid will easily ruin both water meters and magnetic latches. It is better not to keep such devices nearby.

And one more important feature of such filters: you need to mount them on the pipe only after the inside of this section is clean or at least minimally clean from old sediment. The passage of the rays of the field through the old sediment is very difficult, and therefore the whole effect is lost in the bud even at the beginning. So it is better to first dismantle a small section of the pipe where the softener is supposed to be mounted, and rinse it from old scale, and if necessary, clean it with an old iron brush. So the efficiency of the device will very soon show itself as positive results.