How to refill the seal? Stamp ink for printing

2024 Author: Howard Calhoun | [email protected]. Last modified: 2023-12-17 10:16

Modern offices use automatic stamps instead of old stamps. Their second name is trodata, after the name of the company that manufactures the tooling. With constant use, the ink dries and the stamp on the paper is almost invisible. Therefore, it is important to know how to prime the seal.

For this, it is not necessary to contact a specialized company, because everything can be done independently. Instructions are included in the boxes that the product is in. By familiarizing yourself with the simple rules, it will be easy to do everything on your own.

How do I remove the ink pad?

Standard automatic printing has an ink pad in the middle. It will be noticeable when viewed from the side. To determine how to prime the seal, the pad must be removed. To do this, press the 2 buttons located on the sides of the trodata. At the same time, it must be pressed down a little.

If everything is done correctly, and the snap is not damaged, the button will fix the slightly pressed state. Then, with an ordinary pencil, you need to pull out the pad withside gap. Self-typesetting and other types of stamps are also refilled.

Preparation

Before you learn how to refill the seal, you need to clean the pad and remove dirt from it. If there are dents, they must be smoothed out with a non-sharp object. To do this, you can use a regular paper clip. Its tip is used to level the impressions.

A damaged pad has no resilience and does not absorb ink. It shows strong dents that cannot be smoothed out. It is impossible to restore it, besides, it is unsuitable for work. Do not use such a product, you should buy a new one. In this case, there will be no need to know how to refill the print with ink.

Applying stamp paint

How to fill the seal if the pad is prepared? The paint is produced by different companies, including Russia. Do not use mascara or other liquids for this, as then the product will be quickly damaged.

In a standard bottle of paint there is a dispenser that allows you to drip paint. It is enough to apply a few drops evenly. All excess must be removed with a napkin. After that, you should pick up a little until the liquid is absorbed.

Then insert the pad into the tooling with the ink side down. How to fill the print with ink correctly if 2-3 colors are used? It is necessary to take out the pads by filling them with suitable ink. The procedure is the same as with other products. This is how self-typesetting is fueled.

Flashprinting

Flash printing is now in demand. Compared to a conventional stamp, their surface is smooth. The product uses several colors, the print is accurately and evenly applied. Considered durable and secure, these stamps are the choice of choice for many organizations.

Refilling single color flash printing

Although the product is durable, after a while it still needs to be refilled with ink. To quickly do this, you will need a syringe and stamp ink for printing. The cliche is on a shock-absorbing pillow. It is necessary to remove the cliche and put it on a smooth surface. The paint is applied with a syringe. Each layer should not be more than 2 mm. Allow the ink to soak in, then wipe off any remaining ink and assemble the seal.

Refilling multicolor flash printing

To refuel such a product, you need to get a cliché as indicated above. The part is filled with syringes, during which it is necessary to control that there is no mixing of paints. Paints of different shades have differences in the degree of fluidity.

The paint must be applied to one segment, and then to the second. With dressing of each color, you need to use different syringes so that the colors do not turn out blurry. The paint needs to be distributed, and this takes time. Then the cliche must be inserted into its place, and prints can be made.

Stamp ink

Now you can find 3 types of paints: water, oil, alcohol. Their differences lie in the manufacturing technology. Water-based inks are used for printing on paper and materials that absorb water very well. They are used for office seals and stamps. The paint is suitable for manual and automatic products, facsimiles, numerators. It serves for refilling various stamp pads - desktop, replaceable, automatic.

The benefits of water-based paints include:

• fast absorbency;
• fortitude;
• preservation of stamps;
• can be used with various materials.

Because of these product advantages, many companies choose to do their work. There are colors such as purple, blue, black, red, green. Each of them is clearly visible on paper, which is why many offices choose these particular colors.

Alcohol paints are used for non-absorbent surfaces. They will be indispensable for glossy paper, plastic, polyethylene. As the impression is made, the alcohol evaporates and a permanent impression is obtained. Alcohol is an aggressive component, so it has a destructive effect on various materials. This paint is not suitable for:

• automatic printing, since alcohol causes product contamination, destruction of the pillow;
• prints with resin plates affected by alcohol.

The range of spirit paints is richer, as there are purple, blue, black, orange, pink. Quality stamps are obtained.

Oil paints are the most durable. They are used for labeling and numbering.products. Oil is necessary for deep penetration of the paint, so it will be difficult to remove the impression. They are used for different papers. They can be used to refill franking machines, enumerators and other rigs with metal plates.